424B5
Table of Contents

Filed pursuant to Rule 424(b)(5)
Registration Number: 333-193235

 

PROSPECTUS SUPPLEMENT

(To Prospectus dated April 2, 2014)

 

 

 

LOGO

12,500,000 Shares

Common Stock

$4.00 per share

 

 

We are selling 12,500,000 shares of our common stock.

Our common stock is traded on the OTCBB under the symbol “TRXC.” The last sale price of our common stock on April 14, 2014, as reported by the OTCBB, was $8.60 per share. Effective March 31, 2014, we implemented a 1-for-5 reverse stock split. Unless otherwise indicated and excluding historical financial statements incorporated herein, all relevant common share and per common share information in this prospectus supplement have been retroactively adjusted to reflect the 1-for-5 reverse stock split, but does not account for any fractional shares.

 

 

Investing in our common stock involves risk. See “Risk Factors” beginning on page S-6.

 

 

 

     Per Share        Total  

Public offering price

    $ 4.00         $ 50,000,000   

Underwriting discounts and commission(1)

    $ 0.24         $ 3,000,000   

Proceeds to us, before expenses

    $ 3.76         $ 47,000,000   

 

(1) We refer you to “Underwriting” beginning on page S-13 of this prospectus for additional information regarding underwriting compensation.

Certain of our existing stockholders that are affiliated with certain of our directors have agreed to purchase $10,000,000 of our common stock in this offering. The underwriters will receive the same underwriting discount on these shares purchased by these entities as they will on any other shares sold to the public in this offering.

We estimate the total expenses of this offering, excluding the underwriting discounts and commissions, will be approximately $800,000. We have granted the underwriters an option for a period of 30 days from the date of this prospectus supplement to purchase up to a total of 1,875,000 additional shares of our common stock at the public offering price per share, less the underwriting discounts and commissions.

The underwriters expect to deliver the shares on or about April 21, 2014, subject to customary closing conditions.

 

 

Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved the securities described herein or determined if this prospectus is truthful or complete. Any representation to the contrary is a criminal offense.

 

 

 

Stifel   RBC Capital Markets
Ladenburg Thalmann & Co.   Raymond James

The date of this prospectus supplement is April 14, 2014.


Table of Contents

TABLE OF CONTENTS

PROSPECTUS SUPPLEMENT

 

ABOUT THIS PROSPECTUS SUPPLEMENT

     S-ii   

PROSPECTUS SUPPLEMENT SUMMARY

     S-1   

THE OFFERING

     S-5   

RISK FACTORS

     S-6   

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

     S-9   

USE OF PROCEEDS

     S-10   

CAPITALIZATION

     S-11   

DILUTION

     S-12   

UNDERWRITING

     S-13   

LEGAL MATTERS

     S-17   

EXPERTS

     S-17   

WHERE YOU CAN FIND MORE INFORMATION

     S-17   

INCORPORATION BY REFERENCE

     S-18   

PROSPECTUS

 

PROSPECTUS SUMMARY

     1   

ABOUT THIS PROSPECTUS

     5   

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

     6   

RISK FACTORS

     7   

USE OF PROCEEDS

     27   

PLAN OF DISTRIBUTION

     27   

DESCRIPTION OF CAPITAL STOCK

     30   

DESCRIPTION OF DEBT SECURITIES

     31   

DESCRIPTION OF WARRANTS

     35   

DESCRIPTION OF UNITS

     37   

RATIO OF EARNINGS TO FIXED CHARGES

     37   

INCORPORATION BY REFERENCE

     37   

WHERE YOU CAN FIND MORE INFORMATION

     38   

 

S-i


Table of Contents

ABOUT THIS PROSPECTUS SUPPLEMENT

This prospectus supplement is a supplement to the accompanying prospectus dated April 2, 2014 that is also a part of this document. This prospectus supplement and the accompanying prospectus are part of a registration statement that we filed with the Securities and Exchange Commission, or the SEC, using a “shelf” registration process. Under the shelf registration process, from time to time, we may sell any of the securities described in the accompanying prospectus in one or more offerings. In this prospectus supplement, we provide you with specific information about this offering and the securities offered hereby. This prospectus supplement, the accompanying prospectus and the documents incorporated by reference herein and therein include important information about us, our common stock and other information you should know before investing in our common stock. This prospectus supplement also adds, updates and changes information contained in the accompanying prospectus. You should read both this prospectus supplement and the accompanying prospectus as well as the additional information and documents described in this prospectus supplement under the headings “Where You Can Find More Information” and “Incorporation by Reference” before investing in our common stock. To the extent that any statement that we make in this prospectus supplement differs from or is inconsistent with the statements made in the accompanying prospectus or in any document incorporated by reference that was filed with the SEC before the date of this prospectus supplement, the statements made in the accompanying prospectus, or such an earlier filing, as applicable, are deemed modified or superseded by the statements made in this prospectus supplement. If any statement in one of these documents is inconsistent with a statement in another document having a later date – for example, a document incorporated by reference in the accompanying prospectus – the statement having the later date modifies or supersedes the earlier statement.

You should rely only on the information contained or incorporated by reference in this prospectus supplement and in the accompanying prospectus filed by us with the SEC. We have not, and the underwriters have not, authorized any other person to provide you with different information. If anyone provides you with different or inconsistent information, you should not rely on it. We are not, and the underwriters are not, making an offer to sell these securities in any jurisdiction where the offer or sale is not permitted. You should assume that the information appearing in this prospectus supplement, the accompanying prospectus and the documents incorporated by reference is accurate only as of each of their respective dates. Our business, financial condition, results of operations and prospects may have changed since those dates.

On September 3, 2013, SafeStitch Medical, Inc. completed a merger with TransEnterix Surgical, Inc. under which TransEnterix Surgical became a wholly owned subsidiary of SafeStitch. On December 6, 2013, SafeStitch changed its name to TransEnterix, Inc. In this prospectus supplement, when we refer to ourself as a combination of SafeStitch and TransEnterix Surgical after giving effect to the merger, we use the terms “TransEnterix,” the “Company,” “we,” “us,” and “ours.” When we refer to the historical business, operations and corporate status of the parent in the merger we use the term “SafeStitch” and when we refer to the historical business, operations and corporate status of the subsidiary in the merger, we use the term “TransEnterix Surgical.”

This prospectus supplement, the accompanying prospectus and the information incorporated by reference herein and therein include trademarks, service marks and trade names owned by us or other companies. All trademarks, service marks and trade names included or incorporated by reference into this prospectus supplement or the accompanying prospectus are the property of their respective owners.

 

S-ii


Table of Contents

PROSPECTUS SUPPLEMENT SUMMARY

This summary highlights certain information about us, this offering and information appearing elsewhere in this prospectus supplement and in the accompanying prospectus and in the documents we incorporate by reference. This summary is not complete and does not contain all of the information that you should consider before investing in shares of our common stock. The following summary is qualified in its entirety by, and should be read in conjunction with, the more detailed information and financial statements and notes thereto appearing elsewhere in this prospectus supplement, the accompanying prospectus and the documents incorporated by reference herein and therein. Before you decide to invest in shares of our common stock, to fully understand this offering and its consequences to you, you should read the entire prospectus supplement and the accompanying prospectus carefully, including the risk factors beginning on page S-6 of this prospectus supplement and beginning on page 7 of the accompanying prospectus, and the consolidated financial statements and related notes included in this prospectus supplement, the accompanying prospectus and the documents incorporated by reference herein and therein.

TransEnterix, Inc.

Overview

We are a medical device company that is pioneering the use of flexible instruments and robotics to improve minimally invasive surgery. We are currently focused on the development and future commercialization of our SurgiBot™ Surgical System, or SurgiBot System, a minimally invasive surgical robotic system that is designed to utilize flexible instruments through articulating channels controlled directly by the surgeon, with robotic assistance, while the surgeon remains patient-side within the sterile field. The flexible nature of the SurgiBot System would allow for multiple instruments to be introduced and deployed through a single site, thereby offering room for visualization and manipulation once in the body. The SurgiBot System also integrates three-dimensional, or 3-D, high definition vision technology to improve the surgeon’s visualization and manipulation of instruments during surgery.

We believe the SurgiBot System addresses many of the challenges currently faced by patients, surgeons, hospitals and payors in laparoscopy and robotic surgery through a combination of more advanced tools and robotic functionality, which are designed to: (i) empower surgeons with improved precision, strength and visualization; (ii) improve patient satisfaction and post-operative recovery; and (iii) provide a cost-effective robotic system, compared to currently used alternatives, for a potentially wide range of clinical applications.

The SurgiBot System is the powered and robotically-enabled next-generation platform technology of our SPIDER® Surgical System, or SPIDER System, which is a manual laparoscopic device we launched in 2010 that has been used in over 3,500 procedures to date. In developing the SurgiBot System, we have leveraged the extensive research and development, clinical and commercial Spider System experience to combine the single-port capability, “true right/true left” ergonomics, and the internal triangulation of the SPIDER System with robotic capabilities that provide higher levels of strength, precision and advanced vision capabilities. We intend to make submissions seeking U.S. Food and Drug Administration, or FDA, clearance and CE Mark approval of the SurgiBot System by the end of 2014.

Our Market Opportunity

Over the past two decades, laparoscopic surgery has emerged as a minimally invasive alternative to open surgery. While traditional laparoscopy has been a widely adopted minimally invasive alternative to many previously open procedures, it still has many limitations including: (i) requiring multiple incisions to achieve the optimal visualization and instrument triangulation required to perform successful surgery; (ii) creating physical

 

 

S-1


Table of Contents

challenges by forcing the surgeon’s hands and arms be placed in awkward angles and requiring the surgeon to hold instruments in fixed positions for long periods of time; (iii) requiring a surgical assistant to stabilize and move a laparoscopic camera; (iv) creating a cumbersome and potentially tissue-damaging fulcrum at the patient’s abdominal wall where instruments are manipulated; (v) involving rigid instruments that lack the internal articulation required to enhance dexterity in complex or difficult tasks, including dissection and retraction; and (vi) involving procedures that are performed with two dimensional, or 2-D, visualization of the operative space, making depth perception difficult.

More recent attempts at minimally invasive surgery have leveraged robotic technology. Robotic technologies improve upon many aspects of the laparoscopic surgical experience and have gained widespread adoption in urologic and gynecologic procedures. More recently, developed robotic approaches have been applied to many other clinical applications, in particular general surgery. According to Intuitive Surgical, there were approximately 81,000 robotic-assisted general surgery procedures performed in 2013 in the U.S., which has grown from approximately 42,000 in 2012, an increase of 93%. Despite recent advances, we believe that there are many limitations of current robotic-assisted surgery systems used in connection with general laparoscopic surgeries, including: (i) the large capital investment required; (ii) the surgeon operating from outside of the sterile field; (iii) the challenges in maneuvering the patient once a large robotic system is fixed in place; and (iv) the risk of port site trauma by having the robotic arm fulcrum near the incision in a patient’s abdominal wall.

Robotic technologies have experienced strong adoption among large hospitals, academic centers, and teaching hospitals in the U.S. However, a majority of hospitals within the U.S. have not adopted robotic technology for abdominal surgeries due to cost and complexity, as well as the other limitations mentioned above. In addition to these hospitals, there are over 5,000 surgery centers within the U.S. that have very low adoption of robotic technology for abdominal surgeries. We believe a smaller, more affordable surgical robot would provide the right solution for potential customers, particularly in hospital and surgery center settings.

SurgiBot System Robotic Platform

We believe the SurgiBot System will address the needs of the large and growing, yet underserved, population of physicians, hospitals and surgery centers who wish to offer the benefits of robotic assisted surgery at a lower cost than current solutions. The SurgiBot System is designed for a potentially wide range of clinical applications, including general, bariatric and gynecologic surgery. We believe the number of addressable laparoscopic procedures for the SurgiBot System is approximately two million annually. In addition, we expect that hospitals and physicians will be able to utilize existing laparoscopic procedure codes to receive reimbursement for procedures performed using the SurgiBot System.

Key features of the SurgiBot System are:

 

    Precision and control with scaling: The SurgiBot System allows the user to adjust the level of mechanized movement using scaled ratios;

 

    Strength: The SurgiBot System features motor driven-powered motion which is controlled by the surgeon;

 

    Ergonomics: The SurgiBot System stabilizes multiple instruments and a laparoscope, and allows the surgeon to reposition their hands in an ergonomic fashion;

 

    Patient-side in sterile field: The SurgiBot System is positioned next to the operating table, thereby allowing the surgeon, as operator, to remain in the sterile field next to the patient;

 

    Internal triangulation: The SurgiBot System utilizes a deployment mechanism to achieve triangulation of multiple instruments inside the body, as contrasted with other robotic systems that rely on crossing instruments at the patient’s abdominal wall for single site surgery. The SurgiBot System allows for triangulation that can be repositioned in the surgical field during a procedure and maintained at positions throughout a body cavity; and

 

 

S-2


Table of Contents
    Direct surgeon connection to the instruments: The SurgiBot System allows the surgeon-operator to maintain human tactile feedback along several degrees of motion. Existing robotic systems lack any such tactile feedback.

In March 2014, we completed a pre-submission FDA filing for the SurgiBot System.

Our Strategy

Our goal is to develop and commercialize a leading robotics platform with broad procedure applicability to address the challenges of current laparoscopic and robotic offerings. We intend to continue the development of and commence commercialization of the SurgiBot System platform with more advanced tools and robotic functionality, which we believe will: (i) provide surgeons with improved precision, strength and visualization; (ii) improve patient satisfaction and post-operative recovery; and (iii) provide a cost-effective robotic system, compared to existing alternatives. To achieve our objectives, we intend to:

 

    Continue to conduct preclinical studies with surgeons;

 

    Launch a flexible advanced energy device in the second quarter of 2014;

 

    Begin first-in-man clinical studies for our SurgiBot System in the third quarter of 2014;

 

    Submit regulatory filings for approval in the U.S. and Europe in the fourth quarter of 2014; and

 

    Begin commercial sales of the SurgiBot System in the third quarter of 2015.

Recent Developments

On September 3, 2013, SafeStitch Medical, Inc. completed a merger with TransEnterix Surgical, Inc. under which TransEnterix Surgical became a wholly owned subsidiary of SafeStitch.

On September 3, 2013, we consummated a private placement with certain of our investors who are accredited investors in which we issued and sold an aggregate of $28.2 million, net of issuance costs, of our Series B Convertible Preferred Stock, par value $0.01 per share, or Series B Preferred Stock, to provide funding to support our operations following the merger.

On December 6, 2013, we filed an Amended and Restated Certificate of Incorporation, or the Restated Certificate, to change our name to TransEnterix, Inc. and to increase the authorized number of shares of common stock from 225 million to 750 million. In accordance with the terms of the Certificate of Designation of Series B Preferred Stock, each outstanding share of Series B Preferred Stock automatically converted into two shares of our common stock upon the filing of the Restated Certificate. An aggregate of 15,139,409 shares of common stock were issued pursuant to the conversion of the Series B Preferred Stock.

On March 17, 2014, we filed an application to list our shares of common stock on the NYSE MKT. On April 1, 2014, we received authorization to list our shares on the NYSE MKT, subject to completion of this offering and meeting all relevant quantitative and qualitative listing criteria of the NYSE MKT. Although we believe our common stock will be accepted for listing on the NYSE MKT, we cannot assure you that we will be able to sustain such listing. Assuming our application is accepted, we expect to continue trading under the ticker “TRXC” and discontinue trading on the OTC Bulletin Board.

Effective March 31, 2014, we implemented a 1-for-5 reverse stock split. The reverse stock split was effected in connection with our NYSE MKT application to assist in meeting the NYSE MKT minimum bid price requirement of a stock price of at least $2.00 per share. Unless otherwise indicated and excluding historical financial statements incorporated herein, all relevant common share and per common share information in this prospectus supplement have been retroactively adjusted to reflect the 1-for-5 reverse stock split, but does not account for any fractional shares. Trading of our common stock on the OTCBB reflected the reverse split on April 2, 2014.

 

 

S-3


Table of Contents

As of March 31, 2014, our cash, cash equivalents and short-term investments were $8,630,262.

Corporate Information

We were organized as a Delaware corporation on August 19, 1988. Our principal executive offices are located at 635 Davis Drive, Suite 300, Morrisville, NC 27560. Our phone number is (919) 765-8400 and our Internet address is www.transenterix.com. In December 2013, we changed our name to TransEnterix, Inc. from SafeStitch Medical, Inc. The information on our website or any other website is not incorporated by reference in this prospectus supplement and does not constitute a part of this prospectus supplement.

 

 

S-4


Table of Contents

THE OFFERING

 

Common stock offered by us

   12,500,000 shares

Option to purchase additional shares

   1,875,000 shares

Common stock to be outstanding after this offering

   61,341,547 shares

Use of proceeds

   We expect the net proceeds from this offering to be approximately $46.2 million (or $53.3 million if the underwriters exercise their option to purchase additional shares in full), after deducting the underwriting discounts and commissions and estimated offering expenses payable by us. We currently expect to use the net proceeds for research and development, sales, marketing and commercialization related to the SurgiBot System, working capital and other general corporate purposes. See “Use of Proceeds” on page S-10 of this prospectus supplement.

Risk factors

   See “Risk Factors” beginning on page S-6 of this prospectus supplement and on page 7 of the accompanying prospectus for a discussion of factors you should consider carefully when making a decision to invest in our common stock.

OTCBB Symbol

   TRXC

The number of shares of our common stock to be outstanding immediately after this offering is based on 48,841,547 shares outstanding as of December 31, 2013. This number of shares excludes the following:

 

    3,822,887 shares of common stock issuable upon the exercise of outstanding options granted under our stock option plans at a weighted average exercise price of $1.30 per share;

 

    1,285,394 shares of common stock issuable upon exercise of outstanding warrants at a weighted average exercise price of $1.65 per share;

 

    210,000 shares of common stock issuable upon vesting of outstanding restricted stock units; and

 

    4,169,100 shares of common stock available for future issuance under our stock option plans.

Except as otherwise indicated herein, all information in this prospectus supplement, including the number of shares that will be outstanding after this offering, assumes or gives effect to:

 

    a 1-for-5 reverse stock split of our common stock effected on March 31, 2014 but does not account for any fractional shares; and

 

    no exercise of the underwriters’ option to purchase additional shares in this offering.

Certain of our existing stockholders that are affiliated with certain of our directors have agreed to purchase $10,000,000 of our common stock in this offering.

 

 

S-5


Table of Contents

RISK FACTORS

Investing in our securities involves a high degree of risk. For a discussion of the factors you should carefully consider before deciding to purchase any of our securities, please review “Part I, Item 1A—Risk Factors” in our Annual Report on Form 10-K for the year ended December 31, 2013, filed with the SEC on March 5, 2014 and as amended March 14, 2014, March 31, 2014 and April 2, 2014, which is incorporated by reference in this prospectus supplement and the accompanying prospectus. The risks and uncertainties described in the documents incorporated by reference are not the only risks and uncertainties we face. Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also impair our business operations. If any of those risks actually occurs, our business, financial condition and results of operations would suffer. In that event, the market price of our common stock could decline, and you may lose all or part of your investment in our common stock.

Risks Related to This Offering

Management will have broad discretion as to the use of the net proceeds from this offering, and we may not use the proceeds effectively.

Our management will have broad discretion as to the application of the net proceeds and could use them for purposes other than those contemplated at the time of this offering. Our stockholders may not agree with the manner in which our management chooses to allocate and spend the net proceeds. Moreover, our management may use the net proceeds for corporate purposes that may not increase our results of operations or the market value of our common stock. Our failure to apply these funds effectively could have a material adverse effect on our business, delay the development and approval of our products and cause the price of our common stock to decline.

A substantial number of shares of common stock may be sold in the market following this offering, which may depress the market price for our common stock.

Sales of a substantial number of shares of our common stock in the public market following this offering could cause the market price of our common stock to decline. Upon completion of this offering, based on our shares outstanding as of December 31, 2013, we will have outstanding an aggregate of 61,341,547 shares of common stock, assuming no exercise of outstanding options or warrants. All of the shares sold in this offering upon issuance will be freely tradable without restriction or further registration under the Securities Act of 1933, as amended, or the Securities Act, unless these shares are owned or purchased by “affiliates” as that term is defined in Rule 144 under the Securities Act. In addition, we have also registered all of the shares of common stock that we may issue under our stock option plans, and as of December 31, 2013, a total of 3,822,887 shares of our common stock are issuable upon exercise of outstanding options granted by us, at a weighted average exercise price of $1.30 per share, and a total of 4,169,100 shares of common stock remain available for future for issuance under such plans. As a result, these shares can be freely sold in the public market upon issuance, subject to restrictions in our lock-up and voting agreements and under the securities laws.

In connection with the merger and the private placement financing described in the summary of this prospectus supplement, each of the investors participating in the private placement, the largest stockholders of each of SafeStitch and TransEnterix Surgical prior to the merger (many of whom were investors in the private placement), and members of our Board of Directors, agreed to enter into a lock-up and voting agreement, pursuant to which such persons agreed not to sell, transfer or otherwise convey any of the Company’s securities held by them for designated periods following the merger closing date. The total number of our shares subject to the lock-up and voting agreements at the time of the merger was 45,367,165 shares, comprising approximately 93% of our stock on the effective date of the merger. The lock-up and voting agreements provide that such persons may sell, transfer or convey: (1) up to 50% of the locked-up shares (22,683,583 shares) after September 3, 2014 (the one-year anniversary of the merger closing date); (2) an additional 11,341,791 shares after March 3, 2015 (the eighteen-month anniversary of the merger closing date); and (3) the remaining

 

S-6


Table of Contents

11,341,791 shares on September 3, 2015 (the two-year anniversary of the merger closing date). The restrictions on transfer contained in the lock-up and voting agreements cease to apply to all of the locked-up shares following the second anniversary of the merger closing date. These limitations may add to the low volume of shares of our common stock that trade on the OTCBB during the time periods described. After the expiration of these lock-up periods, there may be significant sales of shares of our common stock by the stockholders who received shares in the merger.

Investors in this offering will pay a much higher price than the book value of our stock.

Since the price per share of our common stock being offered will be substantially higher than the net tangible book value per share of our common stock, you will suffer substantial dilution in the net tangible book value of the common stock you purchase in this offering. Our net tangible book value as of December 31, 2013 was approximately $8.4 million, or $0.17 per share. After giving effect to the sale of shares of our common stock in this offering at the public offering price of $4.00 per share and based on our net tangible book value as of December 31, 2013, if you purchase shares of common stock in this offering, you would suffer immediate and substantial dilution of $3.11 per share in the net tangible book value of the common stock. See the section titled “Dilution” below for a more detailed discussion of the dilution you would incur if you purchase common stock in this offering.

You may experience future dilution as a result of future equity offerings or other equity issuances.

In order to raise additional capital, we may in the future offer and issue additional shares of our common stock or other securities convertible into or exchangeable for our common stock. We cannot assure you that we will be able to sell shares or other securities in any other offering at a price per share that is equal to or greater than the price per share paid by investors in this offering, and investors purchasing shares or other securities in the future could have rights superior to existing stockholders. The price per share at which we sell additional shares of our common stock or other securities convertible into or exchangeable for our common stock in future transactions may be higher or lower than the price per share in this offering.

In addition, we have a significant number of stock options outstanding. To the extent that outstanding stock options have been or may be exercised or other shares issued, you may experience further dilution. Further, we may choose to raise additional capital due to market conditions or strategic considerations even if we believe we have sufficient funds for our current or future operating plans.

On March 31, 2014, we implemented a reverse stock split of our common stock, which could result in increased volatility in the price and trading volume of our common stock and cause a decline in the value of our common stock.

On February 12, 2014, the holders of approximately 66% of our voting securities authorized a Certificate of Amendment to the Company’s Amended and Restated Certificate of Incorporation to effect a reverse stock split in the range of one-for-two to one-for-ten, with the actual ratio to be determined by the Board of Directors in its sole discretion, within such range. On March 6, 2014, the Board approved a one-for-five reverse stock split. On March 31, 2014, we filed an amendment to our Certificate of Incorporation to implement the reverse stock split and trading on a post-split basis commenced on April 2, 2014.

While there will not be any change in a stockholder’s economic interest in the Company as a result of such a reverse stock split, stockholders may not view such a reverse stock split in a favorable manner. If such a reverse stock split is not viewed favorably by stockholders, this could result in increased volatility in the price and trading volume of our common stock, which could also cause a decline in the value of our common stock. There can be no assurance that the per share market price of our common stock following the reverse stock split will increase and be maintained in proportion to the reduction in the number of shares of our common stock outstanding before the reverse stock split.

 

S-7


Table of Contents

While the Board of Directors believes that a higher stock price per share, and a lower number of outstanding shares may help generate investor interest, there can be no assurance that the reverse stock split will result in a per-share price that will attract institutional investors or investment funds or that such share price will satisfy the investing guidelines of institutional investors or investment funds. As a result, the trading liquidity of our common stock may not necessarily improve.

 

S-8


Table of Contents

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This prospectus supplement contains forward-looking statements within the meaning of Section 27A of the Securities Act, and Section 21E of the Securities Exchange Act of 1934, as amended (the Exchange Act). All statements, other than statements of historical fact, included or incorporated by reference in this prospectus supplement regarding our strategy, future operations, collaborations, intellectual property, cash resources, financial position, future revenues, projected costs, prospects, plans and objectives are forward-looking statements. The words “believes,” “anticipates,” “estimates,” “plans,” “expects,” “intends,” “may,” “could,” “should,” “potential,” “likely,” “projects,” “continue,” “will,” and “would” and similar expressions are intended to identify forward-looking statements, although not all forward-looking statements contain these identifying words. We cannot guarantee that we actually will achieve the plans, intentions or expectations disclosed in our forward-looking statements and you should not place undue reliance on our forward-looking statements. There are a number of important factors that could cause our actual results to differ materially from those indicated or implied by forward-looking statements. These important factors include those set forth above under the heading “Risk Factors” in this prospectus supplement, the accompanying prospectus and in the reports incorporated by reference herein and therein. These factors and the other cautionary statements made in this prospectus supplement or incorporated by reference herein should be read as being applicable to all related forward-looking statements whenever they appear in this prospectus supplement or in the reports incorporated by reference herein. In addition, any forward-looking statements represent our estimates only as of the date that this prospectus supplement is filed with the SEC, and should not be relied upon as representing our estimates as of any subsequent date. We do not assume any obligation to update any forward-looking statements. We disclaim any intention or obligation to update or revise any forward-looking statement, whether as a result of new information, future events or otherwise.

 

S-9


Table of Contents

USE OF PROCEEDS

We estimate that the net proceeds to us from this offering, based on the sale of 12,500,000 shares of our common stock at the public offering price of $4.00 per share, after deducting underwriting discounts and commissions and estimated offering expenses payable by us, will be approximately $46.2 million (or approximately $53.3 million if the underwriters’ option to purchase additional shares is exercised in full).

We currently intend to use the net proceeds of this offering for research and development, sales, marketing and commercialization related to the SurgiBot System, working capital and other general corporate purposes. While we have estimated the particular uses for the net proceeds of this offering, we have not determined the amounts we plan to spend on any of the areas listed above or the timing of these expenditures. As a result, our management will have broad discretion to allocate the net proceeds from this offering for any purpose, and investors will be relying on the judgment of our management with regard to the use of these net proceeds. Pending use of the net proceeds as described above, we intend to invest the net proceeds in money-market funds or U.S. treasuries until we use them for their stated purpose.

 

S-10


Table of Contents

CAPITALIZATION

The following table sets forth our consolidated cash, cash equivalents and short-term investments, current portion of our notes payable and our capitalization as of December 31, 2013:

 

    on an actual basis; and

 

    on an adjusted basis after giving effect to our sale of 12,500,000 shares of common stock offered hereby at a public offering price of $4.00 per share and the net proceeds of such offering after deducting the underwriting discounts and commissions of $0.24 per share and estimated offering expenses payable by us.

You should read this table along with our historical consolidated financial statements and related notes and the other financial information included and incorporated by reference in this prospectus supplement and the accompanying prospectus.

 

     As of December 31, 2013  
     Actual     As
Adjusted
 
     (In thousands)  

Cash, cash equivalents, and short-term investments

   $ 16,205      $ 62,405   
  

 

 

   

 

 

 

Note payable – current portion

     3,879        3,879   
  

 

 

   

 

 

 

Note payable – less current portion

     4,602        4,602   

Stockholders’ equity:

    

Common stock $0.001 par value, 750,000,000 shares authorized at December 31, 2013; 48,841,547 shares issued and outstanding at December 31, 2013, actual; 61,341,547 shares issued and outstanding at December 31, 2013, as adjusted

     244        257   

Additional paid-in capital

     203,043        249,230   

Accumulated deficit

     (98,264     (98,264
  

 

 

   

 

 

 

Total stockholders’ equity

     105,023        151,223   
  

 

 

   

 

 

 

Total capitalization

   $ 109,625      $ 155,825   
  

 

 

   

 

 

 

 

S-11


Table of Contents

DILUTION

If you purchase any of the shares of common stock offered by this prospectus supplement, you will experience dilution to the extent of the difference between the offering price per share of common stock you pay in this offering and the net tangible book value per share of our common stock immediately after this offering. Our net tangible book value as of December 31, 2013, was approximately $8.4 million, or $0.17 per share of common stock. Net tangible book value per share is equal to our total tangible assets minus total liabilities, all divided by the number of shares of common stock outstanding.

After giving effect to the sale of 12,500,000 shares of common stock by us at a public offering price of $4.00 per share, less the estimated offering expenses, our as adjusted net tangible book value at December 31, 2013, would have been approximately $54.6 million, or $0.89 per share. This represents an immediate increase in the net tangible book value of $0.72 per share to existing stockholders and an immediate dilution of $3.11 per share to investors in this offering. The following table illustrates this per share dilution:

 

Public Offering price per share

      $ 4.00   

Net tangible book value per share as of December 31, 2013

   $ 0.17      

Increase in net tangible book value per share attributable to this offering

   $ 0.72      

As adjusted net tangible book value per share after this offering

      $ 0.89   

Dilution in tangible book value per share to new investors

   $ 3.11      

If the underwriters exercise in full their option to purchase 1,875,000 additional shares, the as adjusted net tangible book value after this offering would be $0.98 per share, representing an increase in net tangible book value of $0.81 per share to existing shareholders and immediate dilution in net tangible book value of $3.02 per share to investors participating in this offering.

Certain of our existing stockholders that are affiliated with certain of our directors have agreed to purchase $10,000,000 of our common stock in this offering.

The number of shares of common stock outstanding used in both the table and calculations above is based on 48,841,547 shares outstanding as of December 31, 2013. This number of shares does not include shares of common stock subject to the underwriters’ option to purchase additional shares and also excludes:

 

    3,822,887 shares of common stock issuable upon the exercise of outstanding options granted under our stock option plans at a weighted average exercise price of $1.30 per share;

 

    1,285,394 shares of common stock issuable upon exercise of outstanding warrants at a weighted average exercise price of $1.65 per share;

 

    210,000 shares of common stock issuable upon vesting of outstanding restricted stock units; and

 

    4,169,100 shares of common stock available for future issuance under our stock option plans.

 

S-12


Table of Contents

UNDERWRITING

Stifel, Nicolaus & Company, Incorporated and RBC Capital Markets, LLC are acting as joint book-running managers of the offering and as representatives of the underwriters named below. Subject to the terms and conditions set forth in an underwriting agreement dated the date of this prospectus supplement, each of the underwriters named below has severally agreed to purchase from us the aggregate number of shares of common stock set forth opposite their respective names below:

 

Underwriters

   Number of Shares  

Stifel, Nicolaus & Company, Incorporated

     5,000,000   

RBC Capital Markets, LLC

     3,750,000   

Ladenburg Thalmann & Co. Inc.

     1,875,000   

Raymond James & Associates, Inc.

     1,875,000   
  

 

 

 

Total

     12,500,000   
  

 

 

 

The underwriting agreement provides that the obligations of the several underwriters to purchase the shares of common stock included in this offering are subject to various conditions, including approval of legal matters by counsel. The nature of the underwriters’ obligations commits them to purchase and pay for all of the shares of common stock listed above, other than those covered by the over-allotment option described below, if any are purchased.

The underwriters expect to deliver the shares of common stock to purchasers on or about April 21, 2014.

Over-Allotment Option

We have granted an option, exercisable for 30 days from the date of this prospectus supplement, to the underwriters to purchase up to a total of 1,875,000 additional shares of our common stock from us at the public offering price, less the underwriting discounts and commissions payable by us, as set forth on the cover page of this prospectus supplement. If the underwriters exercise this option in whole or in part, then each of the underwriters will be separately committed, subject to the conditions described in the underwriting agreement, to purchase the additional shares of our common stock in proportion to their respective commitments set forth in the table above. The underwriters may exercise the option solely for the purpose of covering over-allotments, if any, in connection with this offering. Any shares of common stock issued or sold under the option will be issued and sold on the same terms and conditions as the other shares of common stock that are the subject of this offering.

Commissions and Discounts

The underwriters propose to offer the shares of common stock directly to the public at the public offering price set forth on the cover page of this prospectus supplement, and at this price less a concession not in excess of $0.144 per share of common stock to other dealers. After this offering, the offering price, concessions, and other selling terms may be changed by the underwriters. Our common stock is offered subject to receipt and acceptance by the underwriters and to the other conditions, including the right to reject orders in whole or in part.

The following table summarizes the compensation to be paid to the underwriters by us and the proceeds, before expenses, payable to us:

 

     Per Share      Total  
      Without
Over-Allotment
     With
Over-Allotment
 

Public offering price

     4.00         50,000,000         57,500,000   

Underwriting discount

     0.24         3,000,000         3,450,000   

Proceeds, before expenses, to us

     3.76         47,000,000         54,050,000   

 

S-13


Table of Contents

Certain of our existing stockholders that are affiliated with certain of our directors have agreed to purchase $10,000,000 of our common stock in this offering. The underwriters will receive the same underwriting discount on these shares purchased by these entities as they will on any other shares sold to the public in this offering.

We estimate that the total expenses of this offering payable by us, excluding underwriting discounts and commissions, will be approximately $800,000. We have agreed to reimburse the underwriters for certain expenses in an amount up to $50,000.

Indemnification of Underwriters

We will indemnify the underwriters against some civil liabilities, including liabilities under the Securities Act and liabilities arising from breaches of our representations and warranties contained in the underwriting agreement. If we are unable to provide this indemnification, we will contribute to payments the underwriters may be required to make in respect of those liabilities.

No Sales of Similar Securities

The underwriters will require all of our directors and officers and certain of our stockholders to agree not to offer, sell, agree to sell, directly or indirectly, or otherwise dispose of any shares of common stock or any securities convertible into or exchangeable for shares of common stock except for the shares of common stock offered in this offering without the prior written consent of Stifel, Nicolaus & Company, Incorporated for a period of 90 days after the date of this prospectus supplement, subject to specified limited exceptions. Stifel, Nicolaus & Company, Incorporated and RBC Capital Markets, LLC in their sole discretion may release any of the securities subject to these agreements at any time.

We have agreed that for a period of 90 days after the date of this prospectus supplement, we will not, without the prior written consent of Stifel, Nicolaus & Company, Incorporated and RBC Capital Markets, LLC, offer, sell or otherwise dispose of any shares of common stock, except for the shares of common stock offered in this offering, the shares of common stock issuable upon exercise of outstanding options on the date of this prospectus supplement and other specified limited exceptions.

The 90-day restricted period in all of the agreements is subject to extension if (i) during the last 17 days of the restricted period we issue an earnings release or material news or a material event relating to us occurs or (ii) prior to the expiration of the restricted period, we announce that we will release earnings results during the 16-day period following the last day of the lock-up period, in which case the restrictions imposed in these lock-up agreements shall continue to apply until the expiration of the 18-day period beginning on the issuance of the earnings release or the occurrence of the material news or material event, unless Stifel, Nicolaus & Company, Incorporated and RBC Capital Markets, LLC waive the extension in writing.

Over the Counter Bulletin Board

Our common stock is listed on the OTCBB under the symbol “TRXC.”

Passive Market-Making

In connection with the offering, the underwriters may engage in passive market-making transactions in the common stock on the OTCBB in accordance with Rule 103 of Regulation M under the Exchange Act during the period before the commencement of offers or sales of common stock and extending through the completion and distribution. A passive market-maker must display its bids at a price not in excess of the highest independent bid of the security. However, if all independent bids are lowered below the passive market-maker’s bid that bid must be lowered when specified purchase limits are exceeded.

 

S-14


Table of Contents

Short Sales, Stabilizing Transactions, and Penalty Bids

In order to facilitate this offering, persons participating in this offering may engage in transactions that stabilize, maintain, or otherwise affect the price of our common stock during and after this offering. Specifically, the underwriters may engage in the following activities in accordance with the rules of the SEC.

Short sales. Short sales involve the sales by the underwriters of a greater number of shares than they are required to purchase in the offering. Covered short sales are short sales made in an amount not greater than the underwriters’ over-allotment option to purchase additional shares from us in this offering. The underwriters may close out any covered short position by either exercising their over-allotment option to purchase shares or purchasing shares in the open market. In determining the source of shares to close out the covered short position, the underwriters will consider, among other things, the price of shares available for purchase in the open market as compared to the price at which they may purchase shares through the over-allotment option. Naked short sales are any short sales in excess of such over-allotment option. The underwriters must close out any naked short position by purchasing shares in the open market. A naked short position is more likely to be created if the underwriters are concerned that there may be downward pressure on the price of the common stock in the open market after pricing that could adversely affect investors who purchase in this offering.

Stabilizing transactions. The underwriters may make bids for or purchases of the shares for the purpose of pegging, fixing, or maintaining the price of the shares, so long as stabilizing bids do not exceed a specified maximum. Purchases to cover short positions and stabilizing purchases, as well as other purchases by the underwriters for their own accounts, may have the effect of preventing or slowing a decline in the market price of the shares of common stock. They may also cause the price of the shares of common stock to be higher than the price that would otherwise exist in the open market in the absence of these transactions.

Penalty bids. If the underwriters purchase shares in the open market in a stabilizing transaction or syndicate covering transaction, they may reclaim a selling concession from the underwriters and selling group members who sold those shares as part of this offering. Stabilization and syndicate covering transactions may cause the price of the shares to be higher than it would be in the absence of these transactions. The imposition of a penalty bid might also have an effect on the price of the shares if it discourages resales of the shares.

The transactions above may occur on the OTCBB or otherwise. Neither we nor the underwriters make any representation or prediction as to the effect that the transactions described above may have on the price of the shares. If these transactions are commenced, they may be discontinued without notice at any time.

Discretionary Sales

The underwriters have informed us that they do not expect to confirm sales of common stock offered by this prospectus supplement to accounts over which they exercise discretionary authority without obtaining the specific approval of the account holder.

Electronic Distribution

A prospectus supplement in electronic format may be made available on the internet sites or through other online services maintained by one or more of the underwriters participating in this offering, or by their affiliates. In connection with this offering, the underwriters or certain of the securities dealers may distribute prospectus supplements electronically. The underwriters may agree to allocate a number of shares of common stock for sale to its online brokerage account holders. The underwriters may make internet distributions on the same basis as other allocations. Other than the prospectus supplement in electronic format, the information on any underwriter’s website and any information contained in any other website maintained by an underwriter is not

 

S-15


Table of Contents

part of the prospectus or the registration statement of which this prospectus forms a part, has not been approved or endorsed by us or any underwriter in its capacity as underwriter and should not be relied upon by investors.

Conflicts of Interest

The underwriters and their respective affiliates are full service financial institutions engaged in various activities, which may include securities trading, commercial and investment banking, financial advisory, investment management, principal investment, hedging, financing and brokerage activities. Certain of the underwriters and their affiliates have in the past provided, and may in the future from time to time provide, investment banking and other financing and banking services to us, for which they have in the past received, and may in the future receive, customary fees and reimbursement for their expenses. In the ordinary course of their various business activities, the underwriters and their respective affiliates may make or hold a broad array of investments and actively trade debt and equity securities (or related derivative securities) and financial instruments including bank loans) for their own account and for the accounts of their customers and may at any time hold long and short positions in such securities and instruments. Such investment and securities activities may involve securities and/or instruments of ours or our affiliates. The underwriters and their affiliates may also make investment recommendations and/or publish or express independent research views in respect of such securities or financial instruments and may hold, or recommend to clients that they acquire, long and/or short positions in such securities and instruments.

One of our directors, Dr. Phillip Frost, is the trustee of Frost Gamma Investments Trust which owns approximately 8.8% of our common stock. Frost Gamma Investments Trust owns greater than 10% of Ladenburg Thalmann Financial Services, or LTFS, and Dr. Frost is also Chairman of the Board of LTFS. LTFS is affiliated with Ladenburg Thalmann & Co., one of the underwriters in this offering.

Notice to Prospective Investors in the European Economic Area

In relation to each Member State of the European Economic Area which has implemented the Prospectus Directive (each, a “Relevant Member State”), each underwriter has represented and agreed that with effect from and including the date on which the Prospectus Directive is implemented in that Relevant Member State (the “Relevant Implementation Date”) it has not made and will not make an offer of shares to the public in that Relevant Member State prior to the publication of a prospectus in relation to the shares which has been approved by the competent authority in that Relevant Member State or, where appropriate, approved in another Relevant Member State and notified to the competent authority in that Relevant Member State, all in accordance with the Prospectus Directive, except that it may, with effect from and including the Relevant Implementation Date, make an offer of shares to the public in that Relevant Member State at any time:

 

    to legal entities which are authorized or regulated to operate in the financial markets or, if not so authorized or regulated, whose corporate purpose is solely to invest in securities;

 

    to any legal entity which has two or more of (1) an average of at least 250 employees during the last financial year; (2) a total balance sheet of more than €43,000,000; and (3) an annual net turnover of more than €50,000,000, as shown in its last annual or consolidated accounts;

 

    to fewer than 100 natural or legal persons (other than qualified investors as defined in the Prospectus Directive) subject to obtaining the prior consent of the representatives for any such offer; or

 

    in any other circumstances which do not require the publication by our company of a prospectus pursuant to Article 3 of the Prospectus Directive.

For the purposes of this provision, the expression an “offer of shares to the public” in relation to any shares in any Relevant Member State means the communication in any form and by any means of sufficient information on the terms of the offer and the shares to be offered so as to enable an investor to decide to purchase or subscribe the shares, as the same may be varied in that Relevant Member State by any measure implementing the Prospectus Directive in that Relevant Member State, and the expression Prospectus Directive means Directive 2003/71/EC and includes any relevant implementing measure in each Relevant Member State.

 

S-16


Table of Contents

Notice to Prospective Investors in the United Kingdom

This prospectus is only being distributed to, and is only directed at, persons in the United Kingdom that are qualified investors within the meaning of Article 2(1)(e) of the Prospectus Directive that are also (i) investment professionals falling within Article 19(5) of the Financial Services and Markets Act 2000 (Financial Promotion) Order 2005 (the “Order”) or (ii) high net worth entities, and other persons to whom it may lawfully be communicated, falling within Article 49(2)(a) to (d) of the Order (each such person being referred to as a “relevant person”). This prospectus and its contents are confidential and should not be distributed, published or reproduced (in whole or in part) or disclosed by recipients to any other persons in the United Kingdom. Any person in the United Kingdom that is not a relevant person should not act or rely on this document or any of its contents.

Notice to Prospective Investors in Switzerland

This document as well as any other material relating to the shares which are the subject of the offering contemplated by this prospectus (the “Shares”) do not constitute an issue prospectus pursuant to Article 652a of the Swiss Code of Obligations. The Shares will not be listed on the SWX Swiss Exchange and, therefore, the documents relating to the Shares, including, but not limited to, this document, do not claim to comply with the disclosure standards of the listing rules of SWX Swiss Exchange and corresponding prospectus schemes annexed to the listing rules of the SWX Swiss Exchange.

The Shares are being offered in Switzerland by way of a private placement, i.e. to a small number of selected investors only, without any public offer and only to investors who do not purchase the Shares with the intention to distribute them to the public. The investors will be individually approached by our company from time to time.

This document as well as any other material relating to the Shares are personal and confidential and do not constitute an offer to any other person. This document may only be used by those investors to whom it has been handed out in connection with the offering described herein and may neither directly nor indirectly be distributed or made available to other persons without express consent of our company. It may not be used in connection with any other offer and shall in particular not be copied and/or distributed to the public in (or from) Switzerland.

Miscellaneous

The transfer agent and registrar for our common stock is Continental Stock Transfer & Trust.

LEGAL MATTERS

Certain legal matters with respect to the securities offered hereby have been passed upon by Ballard Spahr LLP. Cooley LLP, New York, New York is counsel for the underwriters in connection with this offering.

EXPERTS

The consolidated financial statements as of December 31, 2013 and 2012 and for each of the two years in the period ended December 31, 2013 incorporated by reference in this prospectus supplement have been so incorporated in reliance on the report of BDO USA, LLP, an independent registered public accounting firm, (the report on the consolidated financial statements contains an explanatory paragraph regarding the Company’s ability to continue as a going concern) incorporated herein by reference, given on the authority of said firm as experts in auditing and accounting.

WHERE YOU CAN FIND MORE INFORMATION

This prospectus supplement and the accompanying prospectus are part of a registration statement on Form S-3 that we filed with the SEC under the Securities Act. This prospectus supplement and the accompanying prospectus do not contain all of the information included in the registration statement. We have omitted certain parts of the registration statement in accordance with the rules and regulations of the SEC. For further

 

S-17


Table of Contents

information, we refer you to the registration statement, including its exhibits and schedules. Statements contained in this prospectus supplement and the accompanying prospectus about the provisions or contents of any contract, agreement or any other document referred to are not necessarily complete. Please refer to the actual exhibit for a more complete description of the matters involved.

We file annual, quarterly and current reports, proxy statements and other information with the SEC. Our SEC filings, including the registration statement and exhibits, are available to the public at the SEC’s website at http://www.sec.gov. You may also read, without charge, and copy the documents we file, at the SEC’s public reference rooms at 100 F Street, N.E., Room 1580, Washington, D.C. 20549. You can request copies of these documents by writing to the SEC and paying a fee for the copying cost. Please call the SEC at 1-800-SEC-0330 for further information on the public reference rooms.

We maintain an Internet site at www.transenterix.com. We have not incorporated by reference into this prospectus supplement or the accompanying prospectus the information on our website, and you should not consider any of the information posted on or hyper-linked to our website to be a part of this prospectus supplement or the accompanying prospectus.

INCORPORATION BY REFERENCE

The SEC allows us to “incorporate by reference” the information we file with the SEC, which means we can disclose important information to you by referring you to those documents. The information we incorporate by reference is an important part of this prospectus supplement, and certain information that we will later file with the SEC will automatically update and supersede this information. We incorporate by reference the documents listed below as well as any future filings made with the SEC under Sections 13(a), 13(c), 14 or 15(d) of the Exchange Act after the date of this prospectus supplement until we sell all of the securities under this prospectus supplement, except that we do not incorporate any document or portion of a document that is “furnished” to the SEC, but not deemed “filed.” The following documents filed with the SEC are incorporated by reference in this prospectus supplement and the accompanying prospectus:

 

    our Annual Report on Form 10-K for the year ended December 31, 2013 filed with the SEC on March 5, 2014, as amended by Amendment No. 1 to our Annual Report on Form 10-K filed with the SEC on March 14, 2014, as amended by Amendment No. 2 to our Annual Report on Form 10-K filed with the SEC on March 31, 2014, as amended by Amendment No. 3 to our Annual Report on Form 10-K filed with the SEC on April 2, 2014;

 

    our Current Report on Form 8-K/A filed on November 13, 2013 (Item 9.01) and our Currents Report on Form 8-K filed with the SEC on February 19, 2014 (Items 5.02, 5.05 and 5.07), April 1, 2014 (Items 5.03 and 9.01), April 1, 2014 (Items 8.01 and 9.01), April 2, 2014 (Items 8.01 and 9.01), April 2, 2014 (Items 8.01 and 9.01), April 14, 2014 (Item 8.01), and April 15, 2014 (Items 1.01 and 9.01);

 

    our definitive Information Statement on Schedule 14C filed February 21, 2014; and

 

    the description of the Company’s common stock contained in the Registration Statement on Form 8-A filed on July 30, 1991 and in the Current Report on Form 8-K filed on March 31, 2014 (Item 8.01), as amended by our Current Report on Form 8-K/A filed on April 4, 2014.

We will furnish to you, on written or oral request, a copy of any or all of the documents that have been incorporated by reference, including exhibits to these documents. You may request a copy of these filings at no cost by writing or telephoning our Secretary at the following address and telephone number:

TransEnterix, Inc.

Attention: Joshua Weingard, Chief Legal Officer and Secretary

635 Davis Drive, Suite 300

Morrisville, NC 27560

Telephone No.: (919) 765-8400

 

S-18


Table of Contents

PROSPECTUS

 

 

 

LOGO

$100,000,000

Common Stock

Preferred Stock

Warrants

Debt Securities

Units

 

 

We may offer and sell from time to time, in one or more offerings, up to $100,000,000 of any combination of common stock, preferred stock, warrants and debt securities, either individually or units consisting of any two or more of such securities. We may also offer securities upon the exercise of warrants.

Each time we sell securities pursuant to this prospectus, we will provide the specific terms of the securities offered in a supplement to this prospectus. The prospectus supplements will also describe the specific manner in which we will offer these securities and may also supplement, update or amend information contained in this prospectus. You should read this prospectus and any related prospectus supplement carefully before you invest in our securities.

The securities may be sold on a delayed or continuous basis directly by us, through dealers, agents or underwriters designated from time to time, or through any combination of these methods. If any dealers, agents or underwriters are involved in the sale of the securities in respect of which this prospectus is being delivered, we will disclose their names and the nature of our arrangements with them in any prospectus supplement. The net proceeds we expect to receive from any such sale will also be included in the applicable prospectus supplement.

Our common stock is traded on the OTC Bulletin Board under the symbol “TRXC.” On April 1, 2014, the closing price of our common stock was $9.70 per share.

 

 

Investing in our securities involves a high degree of risk. See “RISK FACTORS” on page 7.

 

 

This prospectus may not be used to offer or sell securities unless accompanied by a prospectus supplement for the securities being sold.

 

 

Neither the Securities and Exchange Commission nor any other regulatory body has approved or disapproved of these securities or passed upon the adequacy or accuracy of this prospectus. Any representation to the contrary is a criminal offense.

 

 

The date of this Prospectus is April 2, 2014.


Table of Contents

TABLE OF CONTENTS

 

     Page  

PROSPECTUS SUMMARY

     1   

ABOUT THIS PROSPECTUS

     5   

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

     6   

RISK FACTORS

     7   

USE OF PROCEEDS

     27   

PLAN OF DISTRIBUTION

     27   

DESCRIPTION OF CAPITAL STOCK

     30   

DESCRIPTION OF DEBT SECURITIES

     31   

DESCRIPTION OF WARRANTS

     35   

DESCRIPTION OF UNITS

     37   

RATIO OF EARNINGS TO FIXED CHARGES

     37   

INCORPORATION BY REFERENCE

     37   

WHERE YOU CAN FIND MORE INFORMATION

     38   

You should rely only on the information contained in this prospectus and in any prospectus supplement (including in any documents incorporated by reference herein or therein). We have not authorized anyone to provide you with any different information. We are offering to sell our securities, and seeking offers to buy, only in jurisdictions where offers and sales are permitted.


Table of Contents

PROSPECTUS SUMMARY

This summary highlights information contained elsewhere in this prospectus. This summary does not contain all of the information you should consider before investing in our securities. You should read this entire prospectus carefully, especially the “Risk Factors” section beginning on page 8 and our financial statements and the related notes incorporated by reference into this prospectus, before making an investment decision.

Company Overview

On September 3, 2013, SafeStitch Medical, Inc. completed a merger with TransEnterix Surgical, Inc. under which TransEnterix Surgical became a wholly owned subsidiary of SafeStitch. On December 6, 2013, SafeStitch changed its name to TransEnterix, Inc. and its trading symbol to “TRXC.” In connection with the merger, we also consummated a financing by the sale of shares of Series B Convertible Preferred Stock.

In this prospectus, when we refer to the registrant as a combination of SafeStitch and TransEnterix Surgical after giving effect to the merger, we use the terms “TransEnterix,” the “Company,” “we,” “us,” and “ours”. When we refer to the historical business, operations and corporate status of the parent in the merger we use the term “SafeStitch” and when we refer to the historical business, operations and corporate status of the subsidiary in the merger, we use the term “TransEnterix Surgical.”

Reverse Stock Split

On February 12, 2014, the holders of approximately 66% of our common stock authorized a Certificate of Amendment to our Amended and Restated Certificate of Incorporation to effect a reverse stock split in the range of one-for-two to one-for-ten, with the actual ratio to be determined within such range by our Board of Directors in its sole discretion. Subsequently, our Board of Directors approved a one-for-five reverse stock split of our common stock.

The reverse stock split was effected in connection with our application to list our common stock for trading on the NYSE MKT to assist in meeting the NYSE MKT minimum bid price requirement of a stock price of at least $2.00 per share. We submitted an application to have our common stock listed for trading on the NYSE MKT on March 17, 2014. On April 1, 2014, we received authorization to list our shares on the NYSE MKT, subject to completion of a public offering of common shares and meeting all relevant quantitative and qualitative listing criteria of the NYSE MKT. Trading of our common stock on the OTCBB will reflect the reverse stock split on April 2, 2014.

On March 31, 2014, we filed the Certificate of Amendment to our Certificate of Incorporation to effect the reverse stock split. The relevant common share and per common share information in this prospectus have been retroactively adjusted to reflect the impact of the reverse stock split.

 

1


Table of Contents

The following table reflects, for the fiscal years presented therein, the retroactive impact of the reverse stock split on selected common share and per-common share information and includes selected financial data for such periods. As a smaller reporting company, we are presenting such financial data for the past two fiscal years.

 

     For the year ended
December 31,
 
     2013     2012  
     (In thousands)  

Total assets

   $ 116,714      $ 17,560   

Long-term liabilities

   $ 4,602      $ 8,590   

Redeemable convertible preferred stock

   $ —        $ 75,005   

Sales

   $ 1,431      $ 2,115   

Operating loss

   $ (25,604   $ (15,074

Net loss

   $ (28,358   $ (15,425

Net loss per share – basic and diluted

   $ (2.23   $ (14.31

Weighted average common shares outstanding – basic and diluted

     12,731        1,078   

The Merger

On August 13, 2013, SafeStitch, a wholly owned subsidiary of SafeStitch named Tweety Acquisition Corp., and TransEnterix Surgical entered into an agreement and plan of merger, amended on August 30, 2013, under which the parties agreed to enter into the merger described above. The main rationale for the merger was to strengthen capital raising opportunities for TransEnterix Surgical’s primary product candidate, the SurgiBot™ System (described below), through the private placement financing described in the prospectus, and the ability to access public markets for future financings. Pursuant to the merger agreement, each share of TransEnterix Surgical’s capital stock issued and outstanding immediately before the merger was converted into the right to receive 1.1533 shares of SafeStitch’s common stock, other than those shares of TransEnterix Surgical’s common stock held by non-accredited investors. The shares held by non-accredited investors of TransEnterix Surgical were instead converted into the right to receive cash in the amount of $1.08 per share of SafeStitch’s common stock. This cash-out price of $1.08 per share, without interest, was the volume-weighted average price of a share of SafeStitch common stock on the OTC Bulletin Board, or OTCBB, for the 60-trading day period that ended on August 30, 2013, which was one business day prior to the effective date of the merger. Additionally, upon consummation of the merger, SafeStitch assumed all of the outstanding TransEnterix Surgical stock options and warrants. The same exchange ratio of 1.1533 was applied to the assumption of such outstanding stock options and warrants, and impacted the number of shares and the exercise price of such stock options and warrants.

All references to share amounts in this prospectus have been retroactively adjusted to reflect the impact of the exchange ratio of 1.1533 per share. The exchange ratio and the cash-out price have not been adjusted to reflect the reverse stock split.

The Private Financing

On September 3, 2013, we consummated a private placement transaction with certain of our investors who were accredited investors. We sold shares of our Series B Convertible Preferred Stock to provide funding to support our operations following the merger. Pursuant to a securities purchase agreement dated September 3, 2013, an aggregate of 7,544,704.4 shares of our Series B Preferred Stock were sold in the private placement for a purchase price of $4.00 per share of Series B Preferred Stock. The purchase price was paid in cash, cancellation of indebtedness of TransEnterix Surgical or a combination of cash and cancellation of indebtedness. Each share of Series B Preferred Stock was convertible into two (2) shares of our common stock, In accordance with the securities purchase agreement, we sold an additional 25,000 shares of Series B Preferred Stock on September 17, 2013. Proceeds from the sale of the Series B Preferred Stock shares, net of issuance costs, were $28.2 million.

On December 6, 2013, we filed an Amended and Restated Certificate of Incorporation to change our name to TransEnterix, Inc. and to increase the authorized shares of our common stock from 225,000,000 to 750,000,000.

 

2


Table of Contents

In accordance with the Certificate of Designation that defines the terms of the Series B Preferred Stock, upon such filing each outstanding share of Series B Preferred Stock was automatically converted into two (2) shares of our common stock. An aggregate of 15,139,409 shares of common stock were issued in the conversion of the Series B Preferred Stock on December 6, 2013.

Accounting Impact of the Merger

The merger is treated as a reverse acquisition of SafeStitch for financial accounting and reporting purposes. As such, TransEnterix Surgical is treated as the acquirer for accounting and financial reporting purposes while SafeStitch is treated as the acquired entity for accounting and financial reporting purposes. Further, as a result, the assets and liabilities and the historical operations that are reflected in this prospectus and will be reflected in our future financial statements filed with the SEC will be those of TransEnterix Surgical, and SafeStitch assets, liabilities and results of operations will be consolidated with the assets, liabilities and results of operations of TransEnterix Surgical as of and after September 3, 2013, the date of the merger.

The report of BDO USA LLP, our independent registered public accounting firm, on our consolidated financial statements as of December 31, 2013 and 2012 and for each of the two years in the period ended December 31, 2013 contains an explanatory paragraph regarding the substantial doubt about our ability to continue as a going concern. Such consolidated financial statements are incorporated by reference into this prospectus from our Annual Report on Form 10-K for the year ended December 31, 2013.

Business Description of the Combined Company

Overview

We are a medical device company that is focused on the development and future commercialization of a robotic assisted surgical system called the SurgiBot System. The SurgiBot System is designed to utilize flexible instruments through articulating channels controlled directly by the surgeon, with robotic assistance, while the surgeon remains scrubbed within the sterile field. The flexible nature of the SurgiBot System would allow for multiple instruments to be introduced and deployed through a single site, thereby offering room for visualization and manipulation once in the body. The SurgiBot System also integrates three-dimensional (3-D) high definition vision technology. We have also commercialized the SPIDER® Surgical System, a manual laparoscopic system in the United States, Europe and the Middle East. The SPIDER System utilizes flexible instruments and articulating channels that are controlled directly by the surgeon, allowing for multiple instruments to be introduced via a single site. We also currently manufacture multiple instruments that can be deployed using the SPIDER System currently and which are being adapted for use with the SurgiBot System.

Prior to the merger, SafeStitch was focused on developing its Gastroplasty Device for the treatment of obesity and gastroesophageal reflux disease. SafeStitch has developed other surgical devices, including the SMART Dilator™, to be utilized in treating obesity, gastroesophageal reflux disease and esophageal strictures. SafeStitch also developed and was commercializing a surgical stapler called the AMID™ Hernia Fixation Device, or AMID stapler.

Each of the SurgiBot System and Gastroplasty Device is, and the SMART Dilator was, a product candidate in development for which regulatory clearance or approval has not yet been sought from the U.S. Food and Drug Administration, or FDA, or other regulatory bodies. The SPIDER System was cleared for commercialization as a Class II medical device by the FDA in July 2009. The AMID stapler received FDA clearance in November 2009. Each of the SPIDER System and the AMID stapler received CE Mark approval to be commercialized in the European Union. Following the merger, we made the decision to cease commercialization efforts for the AMID stapler and allowed its FDA clearance and CE Mark status to lapse.

On a going-forward basis, we intend to focus on developing the SurgiBot System and on continuing the development of the Gastroplasty Device for the treatment of obesity.

 

3


Table of Contents

We operate in one business segment.

We believe that future outcomes of minimally invasive surgery will be enhanced through our combination of more advanced tools and robotic functionality which will: (i) empower surgeons with improved precision, dexterity and visualization; (ii) improve patient satisfaction and post-operative recovery; and (iii) provide a cost-effective robotic system, compared to existing alternatives today, for a potentially wide range of clinical applications. Our strategy is to focus our primary efforts on the development and commercialization of the SurgiBot System.

Company Information

We were organized as a Delaware corporation on August 19, 1988. Our principal executive offices are located at 635 Davis Drive, Suite 300, Morrisville, NC 27560. Our phone number is (919) 765-8400 and our Internet address is www.transenterix.com. In December 2013, we changed our name to TransEnterix, Inc. from SafeStitch Medical, Inc. The information on our website or any other website is not incorporated by reference in this prospectus and does not constitute a part of this prospectus.

 

4


Table of Contents

ABOUT THIS PROSPECTUS

This prospectus is part of a “shelf” registration statement that we filed with the SEC. By using a shelf registration statement, we may, from time to time, issue any combination of the securities described in this prospectus in one or more offerings up to an aggregate maximum offering price of $100,000,000. Each time we sell any of our securities, we will provide a prospectus supplement that will contain more specific information about the offering and the terms of the securities being sold. We may also add, update or change in the prospectus supplement any of the information contained in this prospectus or the documents incorporated by reference.

This prospectus provides you with a general description of the Company and our securities. For further information about our business and our securities, you should refer to the registration statement and the reports incorporated by reference in this prospectus, as described in “Where You Can Find More Information.”

You should rely only on the information contained in this prospectus and in any prospectus supplement (including in any documents incorporated by reference herein or therein). We have not authorized anyone to provide you with any different information. We are offering to sell our securities, and seeking offers to buy, only in jurisdictions where offers and sales are permitted.

 

5


Table of Contents

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This prospectus contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the Securities Act), and Section 21E of the Securities Exchange Act of 1934, as amended (the Exchange Act). All statements, other than statements of historical fact, included or incorporated in this report regarding our strategy, future operations, collaborations, intellectual property, cash resources, financial position, future revenues, projected costs, prospects, plans, and objectives of management are forward-looking statements. The words “believes,” “anticipates,” “estimates,” “plans,” “expects,” “intends,” “may,” “could,” “should,” “potential,” “likely,” “projects,” “continue,” “will,” and “would” and similar expressions are intended to identify forward-looking statements, although not all forward-looking statements contain these identifying words. We cannot guarantee that we actually will achieve the plans, intentions or expectations disclosed in our forward-looking statements and you should not place undue reliance on our forward-looking statements. There are a number of important factors that could cause our actual results to differ materially from those indicated or implied by forward-looking statements. These important factors include those set forth below under the heading “Risk Factors.” These factors and the other cautionary statements made in this prospectus should be read as being applicable to all related forward-looking statements whenever they appear in this prospectus. In addition, any forward-looking statements represent our estimates only as of the date that this prospectus is filed with the SEC, and should not be relied upon as representing our estimates as of any subsequent date. We do not assume any obligation to update any forward-looking statements. We disclaim any intention or obligation to update or revise any forward-looking statement, whether as a result of new information, future events or otherwise.

 

6


Table of Contents

RISK FACTORS

An investment in the Company involves a significant level of risk. Investors should carefully consider the risk factors described below together with the other information included in this prospectus. If any of the risks described below occurs, or if other risks not identified below occur, our business, financial condition, and results of operations could be materially and adversely affected.

Risks Related to our Business

We have a history of operating losses, and we may not be able to achieve or sustain profitability. In addition, we may be unable to continue as a going concern.

We are a medical device company with a limited operating history. We are not profitable and have incurred losses since our inception. Substantial doubt exists about our ability to continue as a going concern as a result of recurring losses and an accumulated deficit. We continue to incur research and development and general and administrative expenses related to our operations. Our net loss for the year ended December 31, 2013 was $28.4 million, and our accumulated deficit as of December 31, 2013 was $93.3 million.

We expect to continue to incur losses for the foreseeable future, and these losses will likely increase as we prepare for clinical trials of our products and continue to commercialize our cleared or approved products. If our products fail in clinical trials or do not gain regulatory clearance or approval, or if our products do not achieve market acceptance, we may never become profitable. Even if we achieve profitability in the future, we may not be able to sustain profitability in subsequent periods. Absent a significant increase in revenue or additional equity or debt financing, we may not be able to sustain our ability to continue as a going concern. On March 31, 2014, we filed this prospectus as part of a Registration Statement on Form S-3 to register $100,000,000 of our securities for sale from time to time. Once such Registration Statement is declared effective by the SEC, we do anticipate proceeding with offerings of our securities in accordance with the shelf registration statement requirements. We cannot assure you that we will be successful in obtaining such additional financing on terms acceptable to us or at all.

We will require substantial additional funding, which may not be available to us on acceptable terms, or at all.

The net proceeds of recent financings, including the private placement financing described in the summary of this prospectus, will not be sufficient to support clinical and pre-clinical development of our products and product candidates and provide us with the necessary resources to commercialize these products and product candidates. While we are currently focused on our SurgiBot System product, we intend to advance multiple additional products through clinical and pre-clinical development in the future. We will likely need to raise substantial additional capital in order to continue our operations and achieve our business’ objectives.

Our future funding requirements will depend on many factors, including, but not limited to:

 

    the costs associated with the integration of the respective businesses and operations of SafeStitch and TransEnterix Surgical;

 

    the costs associated with establishing a sales force and commercialization capabilities;

 

    the costs associated with the expansion of our manufacturing capabilities;

 

    our need to expand our research and development activities;

 

    the rate of progress and cost of our clinical trials;

 

    the costs of acquiring, licensing or investing in businesses, products and technologies;

 

    the costs and timing of seeking and obtaining FDA and other non-U.S. regulatory clearances and approvals;

 

7


Table of Contents
    the economic and other terms and timing of our existing licensing arrangement and any collaboration, licensing or other arrangements into which we may enter in the future;

 

    our need and ability to hire additional management, scientific, medical and sales and marketing personnel;

 

    the effect of competing technological and market developments;

 

    our need to implement additional internal systems and infrastructure, including financial and reporting systems; and

 

    our ability to maintain, expand and defend the scope of our intellectual property portfolio.

Until we generate a sufficient amount of product revenue to finance our cash requirements, which may never occur, we expect to finance future cash needs primarily through public or private equity offerings, debt financings or strategic collaborations. We do not know whether additional funding will be available on acceptable terms, or at all. If we are not able to secure additional funding when needed, we may have to delay, reduce the scope of or eliminate one or more of our clinical trials or research and development programs. To the extent that we raise additional funds by issuing equity securities, our stockholders may experience significant dilution; and debt financing, if available, may involve restrictive covenants that limit our operations. To the extent that we raise additional funds through collaboration and licensing arrangements, it may be necessary to relinquish some rights to our products or grant licenses on terms that may not be favorable to us.

We may fail to realize some or all of the anticipated benefits of the business combination of SafeStitch and TransEnterix Surgical, which may adversely affect the value of our common stock.

The success of the integration of TransEnterix Surgical will depend, in part, on our ability to realize the anticipated benefits and cost savings from combining the respective business and operations of SafeStitch and TransEnterix Surgical. To realize these anticipated benefits and cost savings, we must successfully combine the acquired business with our legacy operations and integrate our respective operations, technologies and personnel, which is particularly challenging given the geographic and cultural differences between the personnel and facilities based in Florida and North Carolina and the lack of experience we have in combining businesses. If we are not able to achieve these objectives within the anticipated time frame or at all, the anticipated benefits and cost savings of the acquisition may not be realized fully or at all or may take longer to realize than expected, and the value of our common stock may be adversely affected. In addition, the overall integration of the businesses is a complex, time-consuming and expensive process that, without proper planning and effective and timely implementation, could significantly disrupt our operations. Further, it is possible that the integration process could adversely affect our ability to maintain our research and development operations, result in the loss of key employees and other senior management, or to otherwise achieve the anticipated benefits of the acquisition.

Risks in integrating the respective operations of SafeStitch and TransEnterix Surgical in order to realize the anticipated benefits of the acquisition include, among other factors:

 

    failure to effectively coordinate research and development efforts and capabilities effectively;

 

    failure to adequately communicate our product capabilities and expected product roadmap;

 

    failure to compete effectively against companies already serving the broader market opportunities expected to be available to us and our potential expanded product offerings;

 

    coordinating research and development activities to enhance the introduction of new devices and platforms acquired in the acquisition;

 

    failure to successfully integrate and harmonize financial reporting and information technology systems of the two companies;

 

    integrating a senior management team as well as directors from both companies on our Board of Directors;

 

    retaining and integrating key employees from TransEnterix Surgical and SafeStitch;

 

8


Table of Contents
    managing effectively the diversion of management’s attention from business matters to integration issues;

 

    retaining TransEnterix Surgical’s relationships with partners and integrating partnering efforts so that new partners acquired can easily do business with us; and

 

    transitioning all facilities to a common information technology environment.

In addition, the actual integration may result in additional and unforeseen expenses, and the anticipated benefits of the integration plan may not be realized. Actual cost synergies, if achieved at all, may be lower than we expect and may take longer to achieve than anticipated. If we are not able to adequately address these challenges, we may be unable to successfully integrate the respective operations of SafeStitch and TransEnterix Surgical, or to realize the anticipated benefits of the integration. The anticipated benefits and synergies assume a successful integration and are based on projections, which are inherently uncertain, and other assumptions. Even if integration is successful, anticipated benefits and synergies may not be achieved. An inability to realize the full extent of, or any of, the anticipated benefits of the acquisition, as well as any delays encountered in the integration process, could have an adverse effect on our business and results of operations, which may affect the value of the shares of our common stock.

We have incurred significant costs related to the merger and expect to incur additional costs as integration plans continue. If we are unable to offset the costs of the acquisition through realization of efficiencies, our financial condition, liquidity and results of operations will suffer.

We have incurred, and expect to continue to incur, various non-recurring costs associated with combining the operations of TransEnterix Surgical and SafeStitch, including, but not limited to, legal, accounting and financial advisory fees. The substantial majority of non-recurring expenses have been composed of these costs and expenses related to the execution of the acquisition, facilities and systems consolidation costs and employment-related costs. We have also incurred fees and costs related to formulating and implementing integration plans. Additional unanticipated costs may be incurred in the integration of the businesses. Although we expect that the elimination of duplicative costs, as well as the realization of other efficiencies related to the integration of the businesses, should allow us to offset incremental acquisition and acquisition-related costs over time, this net benefit may not be achieved in the near term, or at all.

We have a substantial amount of indebtedness, which may adversely affect our financial resources and our ability to operate our business.

In connection with the merger we became a party to, and jointly and severally liable for, $9.4 million of outstanding debt of TransEnterix Surgical, and the associated obligations owed by TransEnterix Surgical under a Loan and Security Agreement, dated January 17, 2012, among TransEnterix Surgical, Silicon Valley Bank and Oxford Finance LLC, as amended by a First, Second and Third Amendment, dated February 11, 2013, September 3, 2013 and October 31, 2013, respectively. The amended Loan and Security Agreement evidences a term loan, which will mature on January 1, 2016. Our resulting substantial level of indebtedness and other financial obligations increase the possibility that we may be unable to pay, when due, the principal of, interest on, or other amounts due in respect of, our indebtedness.

Further, under the amended Loan and Security Agreement, we are subject to certain restrictive covenants that, among other things, may limit our ability to obtain additional financing for working capital requirements, product development activities, debt service requirements, and general corporate or other purposes. These restrictive covenants include, without limitation, restrictions on our ability to: (1) change the nature of our business; (2) incur additional indebtedness; (3) incur liens; (4) make certain investments; (5) make certain dispositions of assets; (6) merge, dissolve, consolidate or sell all or substantially all of our assets; and (7) enter into transactions with affiliates.

 

9


Table of Contents

If we breach any of these restrictive covenants or are unable to pay our indebtedness under the amended Loan and Security Agreement when due, this could result in an event of default. In such event, the lenders may elect (after the expiration of any applicable notice or grace periods) to declare all outstanding borrowings, together with accrued and unpaid interest and other amounts payable under the term loan, to be immediately due and payable. Any such occurrence would have an immediate and materially adverse impact on our business and results of operations.

Some of our technologies are in an early stage of development and not yet proven. Further, our related product research and development activities may not lead to our technologies and products being commercially viable.

We are engaged in the research and development of minimally invasive surgical devices, robotic surgical devices, and intraluminal medical devices that manipulate tissues for the treatment of certain intraperitoneal abnormalities. The effectiveness of our technologies is not well known in, or may not be accepted generally by, the clinical medical community. Further, some of our products are still in early stages of development and are prone to the risks of failure inherent in medical device product development. In particular, any of our products in clinical trials may fail to show desired efficacy and safety traits despite early promising results. A number of companies in the medical device industry have suffered significant setbacks in advanced clinical trials, even after obtaining promising results at earlier points. The occurrence of any such events would have a material adverse effect on our business.

Our product research and development activities may not result in commercially viable products.

Some of our products are still in early stages of development and are prone to the risks of failure inherent in medical device product development. If required by the FDA, we may be required to undertake significant clinical trials to demonstrate to the FDA that our medical devices are safe and effective for their intended uses. We may also be required to undertake clinical trials by non-U.S. regulatory agencies. Clinical trials are expensive and uncertain processes that may take years to complete. Failure can occur at any point in the process, and early positive results do not ensure that the entire clinical trial will be successful.

The regulatory approval and clearance processes are expensive, time-consuming and uncertain and may prevent us or our collaboration partners from obtaining approvals or clearances, as the case may be, for the commercialization of some or all of our products.

Our products are subject to rigorous regulation by the FDA and numerous other federal, state and foreign governmental authorities. The process of obtaining regulatory clearances or approvals to market a medical device can be costly and time consuming, and we may not be able to obtain these clearances or approvals on a timely basis, if at all. In particular, the FDA permits commercial distribution of a new medical device only after the device has received clearance under Section 510(k) of the Federal Food, Drug and Cosmetic Act, or is the subject of an approved premarket approval application unless the device is specifically exempt from those requirements.

In the United States, a company generally can obtain permission to distribute a new medical device in one of two ways. The first applies to any device that is substantially equivalent to a device first marketed prior to May 1976, or to another device marketed after that date, but which was substantially equivalent to a pre-May 1976 device. These devices are either Class I or Class II devices. To obtain FDA clearance to distribute the medical device, a company generally must submit a Section 510(k) submission, and receive an FDA order finding substantial equivalence to a predicate device (pre-May 1976 device or post-May 1976 device that was substantially equivalent to a pre-May 1976 device) and permitting commercial distribution of that medical device for its intended use. A 510(k) submission must provide information supporting a claim of substantial equivalence to the predicate device. If clinical data from human clinical trials are required to support the 510(k) submission, these data must be gathered in compliance with investigational device exemption, or IDE, regulations for investigations performed in the United States. The FDA review process for premarket notifications submitted

 

10


Table of Contents

pursuant to Section 510(k) takes, on average, about ninety (90) days, but it can take substantially longer if the FDA has concerns regarding the application. There is no guarantee that the FDA will “clear” a medical device for marketing, in which case the device cannot be distributed in the United States. There is also no guarantee that the FDA will deem the applicable device subject to the 510(k) process, as opposed to the more time-consuming, resource-intensive and problematic, pre-market approval, or PMA, process described below.

The second, more comprehensive, PMA process applies to a new device that is not substantially equivalent to a pre-1976 product or that is to be used in supporting or sustaining life or preventing impairment. These devices are normally Class III devices. For example, most implantable devices are subject to the PMA process. Two steps of FDA approval are generally required before a company can market a product in the United States that is subject to approval, as opposed to clearance, as a Class III device. First, a company must comply with IDE regulations in connection with any human clinical investigation of the device. These regulations permit a company to undertake a clinical study of a “non-significant risk” device without formal FDA approval. Prior express FDA approval is required if the device is a significant risk device. Second, the FDA must review the company’s PMA application. A PMA application must be supported by extensive data, including, but not limited to, technical, preclinical, clinical trial, manufacturing and labeling data, to demonstrate to the FDA’s satisfaction the safety and efficacy of the device for its intended use. Additionally, devices subject to PMA approval may be subject to a panel review to obtain market approval and are required to pass a factory inspection in accordance with the current “good manufacturing practices” standards in order to obtain approval. The FDA will approve the PMA application if it finds there is reasonable assurance that the device is safe and effective for its intended use. The PMA process takes substantially longer than the 510(k) process, approximately one to two years. However, in some instances the FDA may find that a device is new and not substantially equivalent to a predicate device but is also not a high risk device as is generally the case with Class III PMA devices. In these instances FDA may allow a device to be down classified from Class III to Class I or II.

The Food and Drug Administration Modernization Act of 1997 added the de novo classification option as an alternate pathway to classify novel devices of low to moderate risk that had automatically been placed in Class III after receiving a “not substantially equivalent” determination in response to a premarket notification 510(k) submission. Under current law, a company can submit a de novo classification request to the FDA for novel low to moderate risk devices without first being required to submit a 510(k) application. These types of applications are referred to as “Evaluation of Automatic Class III Designation” or “de novo.” In instances where a device is deemed not substantially equivalent to a Class II predicate device, the candidate device may be filed as a de novo application which may lead to delays in regulatory decisions by the FDA. FDA review of a de novo application may lead the FDA to identify the device as either a Class I or II device and worthy of either an exempt or 510(k) regulatory pathway.

The FDA or other non-U.S. regulatory authorities can delay, limit or deny clearance or approval of a medical device candidate for many reasons, including:

 

    a medical device candidate may not be deemed safe or effective, in the case of a PMA application;

 

    a medical device candidate may not be deemed to be substantially equivalent to a device lawfully marketed either as a grandfathered device or one that was cleared through the 510(k) premarket notification process;

 

    a medical device candidate may not be deemed to be in conformance with applicable standards and regulations;

 

    FDA or other regulatory officials may not find the data from pre-clinical studies and clinical trials sufficient;

 

    the FDA might not approve our processes or facilities or those of any of our third-party manufacturers for our Class III PMA devices;

 

    other non-U.S. regulatory authorities may not approve our processes or facilities or those of any of our third-party manufacturers, thereby restricting export; or

 

    the FDA or other non-U.S. regulatory authorities may change clearance or approval policies or adopt new regulations.

 

11


Table of Contents

While we have already received FDA clearance for the SPIDER System, we continue in discussions with the FDA regarding the appropriate regulatory pathway for our SurgiBot System and our Gastroplasty Device. Obtaining approval of any PMA can be a lengthy, expensive and uncertain process. While the FDA normally reviews a premarket notification in ninety (90) days, there is no guarantee that our future products will qualify for this more expeditious regulatory process, which is reserved for Class I and II devices, nor is there any assurance, even if a device is reviewed under the 510(k) premarket notification process, that the FDA will review it expeditiously or determine that the device is substantially equivalent to a lawfully marketed non-PMA device. In the past we have been successful in receiving 510(k) clearance within the 90-day review period, but it can take longer (six to twelve months) to obtain 510(k) clearance for a Class II device. If the FDA fails to provide clearance for a product candidate, such as the SurgiBot System, then we cannot market the device. In lieu of acting on a premarket notification, the FDA may seek additional information or additional data which would further delay our ability to market the product.

The results of previous clinical experience with our devices and devices similar to those that we are developing may not be indicative of future results, and our current and planned clinical trials may not satisfy the requirements of the FDA or other non-U.S. regulatory authorities.

Positive results from limited animal trials and other early development work we have conducted or early clinical experience with the test articles or with similar devices should not be relied upon as evidence that later-stage or large-scale clinical trials will succeed. We will be required to demonstrate with substantial evidence through well-controlled clinical trials that our future Class III products are safe and effective for their intended uses. Generally, clinical data is not required to support a 510(k) application, but if applicable for our Class II products, we may require clinical data to demonstrate that the devices are substantially equivalent in terms of safety and effectiveness to devices that are already marketed under Section 510(k). We have participated in discussions with the FDA regarding the appropriate regulatory pathway for our products, primarily for the SurgiBot System. While clinical trial data for Class II devices are generally not required, we have received information from the FDA that clinical trial data may be required for the SurgiBot System to enable market clearance. Such requirements could be expensive and could delay the clearance of the SurgiBot System.

Further, our products may not be cleared or approved, as the case may be, even if the clinical data are satisfactory and support, in our view, clearance or approval. The FDA or other non-U.S. regulatory authorities may disagree with our trial design and our interpretation of the clinical data. Any of these regulatory authorities may change requirements for the clearance or approval of a product even after reviewing and providing comment on a protocol for a pivotal clinical trial that has the potential to result in FDA approval. These regulatory authorities may also clear or approve a product for fewer or more limited uses than we request or, for a Class III device, may grant approval contingent on the performance of costly post-marketing clinical trials. In addition, the FDA or other non-U.S. regulatory authorities may not approve or clear the labeling claims necessary or desirable for the successful commercialization of our products.

We are highly dependent on the success of our products, and we cannot give any assurance that our products will receive regulatory clearance or that any of our products or future products will be successfully commercialized.

We are highly dependent on the success of our products, especially the SurgiBot System. We cannot give any assurance that the FDA will grant regulatory clearance for the SurgiBot System, or will not require the more burdensome PMA submission and approval, nor can we give any assurance that the SurgiBot System or any of our other products will be successfully commercialized, for a number of reasons, including, without limitation, the potential introduction by our competitors of more clinically effective or cost-effective alternatives, or failure in our sales and marketing efforts. Any failure to obtain clearance or approval of our products or to successfully commercialize them would have a material and adverse effect on our business.

 

12


Table of Contents

If our competitors develop and market products that are more effective, safer or less expensive than our products and future products, our commercial opportunities will be negatively impacted.

The life sciences industry is highly competitive, and we face significant competition from many medical device companies that are researching and marketing products designed to address minimally invasive and robotic assisted surgery. We are currently developing and commercializing medical devices that will compete with other medical devices that currently exist or are being developed. Products we may develop in the future are also likely to face competition from other medical devices and therapies. Many of our competitors have significantly greater financial, manufacturing, marketing and product development resources than we do. Large medical device companies, in particular, have extensive experience in clinical testing and in obtaining regulatory clearances or approvals for medical devices. These companies also have significantly greater research and marketing capabilities than we do. Some of the medical device companies we expect to compete with include Applied Medical, Covidien, Intuitive Surgical, Johnson & Johnson, Olympus, Stryker, USGI Medical, Endo Gastric Solutions, Inc., ValenTx, Inc., GI Dynamics, Inc., Medigus, Ltd., and a number of minimally invasive surgical device, robotic surgical device manufacturers and providers of products and therapies that are designed to reduce the need for or attractiveness of surgical intervention. In addition, many other universities and private and public research institutions are or may become active in research involving surgical devices for minimally invasive and robotic assisted surgery.

We believe that our ability to successfully compete will depend on, among other things:

 

    the efficacy, safety and reliability of our products;

 

    the speed at which we develop our products;

 

    our ability to commercialize and market any of our products that may receive regulatory clearance or approval;

 

    our ability to design and successfully execute appropriate clinical trials;

 

    the timing and scope of regulatory clearances or approvals;

 

    our ability to protect intellectual property rights related to our products;

 

    our ability to have our partners manufacture and sell commercial quantities of any approved products to the market; and

 

    acceptance of future products by physicians and other health care providers.

If our competitors market products that are more effective, safer, easier to use or less expensive than our products or future products, or reach the market sooner than our products, we may not achieve commercial success. In addition, the medical device industry is characterized by rapid technological change. It may be difficult for us to stay abreast of the rapid changes in each technology. If we fail to stay at the forefront of technological change, we may be unable to compete effectively. Technological advances or products developed by our competitors may render our technologies or products obsolete or less competitive.

Our product development activities could be delayed or stopped.

We do not know whether our current product development activities will result in products that meet necessary standards and performance criteria or whether the development will be completed on schedule. Delays could occur based on a number of issues that could arise. For example, should clinical trials be required, the commencement of clinical trials could be substantially delayed or prevented by several factors, including:

 

    delay or failure to obtain sufficient supplies of the product for our clinical trials;

 

    limited number of, and competition for, suitable patients that meet the protocol’s inclusion criteria and do not meet any of the exclusion criteria;

 

13


Table of Contents
    limited number of, and competition for, suitable sites to conduct our clinical trials, and delay or failure to obtain FDA approval, if necessary, to commence a clinical trial;

 

    requirements to provide the medical device required in our clinical trial at cost, which may require significant expenditures that we are unable or unwilling to make;

 

    delay or failure to reach agreement on acceptable clinical trial agreement terms or clinical trial protocols with prospective sites or investigators; and

 

    delay or failure to obtain institutional review board approval or renewal to conduct a clinical trial at a prospective or accruing site, respectively.

The completion of our clinical trials could also be substantially delayed or prevented by several factors, including:

 

    lack of efficacy evidenced during clinical trials;

 

    slower than expected rates of patient recruitment and enrollment;

 

    failure of patients to complete the clinical trial;

 

    unforeseen safety issues;

 

    termination of our clinical trials by one or more clinical trial sites;

 

    inability or unwillingness of patients or medical investigators to follow our clinical trial protocols or allocate sufficient resources to complete our clinical trials; and

 

    inability to monitor patients adequately during or after treatment.

Our clinical trials may be suspended or terminated at any time by us, the FDA, other regulatory authorities or the institutional review board for any given clinical trial site. Any failure or significant delay in completing clinical trials for our products could materially harm our financial results and the commercial prospects for our products.

In addition, other issues such as the need to investigate third party patents and potential infringement matters, although not currently an issue, could arise, thereby delaying our development efforts.

Even if we obtain regulatory clearances or approvals for our products, the terms of such clearances or approvals, and ongoing regulation of our products may limit how we manufacture and market our products, which could materially impair our ability to generate anticipated revenues.

Once regulatory clearance or approval has been granted, the cleared or approved product and its manufacturer are subject to continual review. Any cleared or approved product may be promoted only for its indicated uses. In addition, if the FDA or other non-U.S. regulatory authorities clear or approve any of our products, the labeling, packaging, adverse event reporting, storage, advertising and promotion for the product will be subject to extensive regulatory requirements. We and the manufacturers of our products are also required to comply with the FDA’s Quality System Regulation, which includes requirements relating to quality control and quality assurance, as well as the corresponding maintenance of records and documentation as well as other quality system requirements and regulations from non-U.S. regulatory authorities. Moreover, device manufacturers are required to report adverse events by filing Medical Device Reports with the FDA, which are publicly available. Further, regulatory agencies must approve our manufacturing facilities for Class III devices before they can be used to manufacture our products, and all manufacturing facilities are subject to ongoing regulatory inspection. If we fail to comply with the regulatory requirements of the FDA, either before or after clearance or approval, or other non-U.S. regulatory authorities, or if previously unknown problems with our products, manufacturers or manufacturing processes are discovered, we could be subject to administrative or judicially imposed sanctions, including:

 

    restrictions on the products, manufacturers or manufacturing process;

 

    adverse inspectional observations, known as Form 483 notices, warning letters, non-warning letters incorporating inspectional observations;

 

14


Table of Contents
    civil or criminal penalties or fines;

 

    injunctions;

 

    product seizures, detentions or import bans;

 

    voluntary or mandatory product recalls and publicity requirements;

 

    suspension or withdrawal of regulatory clearances or approvals;

 

    total or partial suspension of production;

 

    imposition of restrictions on operations, including costly new manufacturing requirements;

 

    refusal to clear or approve pending applications or premarket notifications; and

 

    import and export restrictions.

In addition, the FDA and other non-U.S. regulatory authorities may change their policies and additional regulations may be enacted that could prevent or delay regulatory clearance or approval of our products. We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative action, either in the United States or abroad. If we are not able to maintain regulatory compliance, we would likely not be permitted to market our future products and we may not achieve or sustain profitability.

Current legislation and future legislative or regulatory reform of the FDA clearance and approval process may make it more difficult and costly for us to obtain regulatory approval of our product candidates and to manufacture, market and distribute our products after approval is obtained.

From time to time, legislation is drafted and introduced in Congress that could significantly change the statutory provisions governing the regulatory approval, manufacture and marketing of regulated products or the reimbursement thereof. In addition, FDA regulations and guidance are often revised or reinterpreted by the FDA in ways that may significantly affect our business and our products under development. Any new regulations or revisions or reinterpretations of existing regulations may impose additional costs or lengthen review times of future products. In addition, FDA regulations and guidance are often revised or reinterpreted by the agency in ways that may significantly affect our business and our products. It is impossible to predict whether legislative changes will be enacted or FDA regulations, guidance or interpretations changed, and what the impact of such changes, if any, may be.

For example, the FDA may change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions which may prevent or delay approval or clearance of our products under development or impact our ability to modify our currently cleared products on a timely basis. In 2011, the FDA initiated a review of the premarket clearance process in response to internal and external concerns regarding the 510(k) program, announcing 25 action items designed to make the process more rigorous and transparent. In addition, as part of the Food and Drug Administration Safety and Innovation Act of 2012, Congress enacted several reforms entitled the Medical Device Regulatory Improvements and additional miscellaneous provisions which will further affect medical device regulation both pre- and post-approval. The FDA has implemented, and continues to implement, these reforms, which could impose additional regulatory requirements upon us and delay our ability to obtain new 510(k) clearances, increase the costs of compliance or restrict our ability to maintain our current clearances. For example, the FDA recently issued guidance documents intended to explain the procedures and criteria the FDA will use in assessing whether a 510(k) submission meets a minimum threshold of acceptability and should be accepted for review. Under the “Refuse to Accept” guidance, the FDA conducts an early review against specific acceptance criteria to inform 510(k) submitters if the submission is administratively complete, or if not, to identify the missing element(s). Submitters are given the opportunity to provide the FDA with the identified information, but if the information is not provided within a defined time, the submission will not be accepted for FDA review. Any change in the laws or regulations that govern the clearance and approval processes relating to our current and future products could make it more difficult and costly to obtain clearance

 

15


Table of Contents

or approval for new products, or to produce, market and distribute existing products. Significant delays in receiving clearance or approval, or the failure to receive clearance or approval for our new products would have an adverse effect on our ability to expand our business.

Current legislation and future legislative or regulatory reform of the health care system may affect our ability to sell our products profitably.

In the United States, there have been, and we expect there to continue to be, a number of legislative and regulatory initiatives, at both the federal and state government levels, to change the healthcare system in ways that, if approved, could affect our ability to sell our products profitably. While many of the proposed policy changes require congressional approval to implement, we cannot be sure that reimbursement payments under governmental and private third-party payor programs to health care providers will remain at levels comparable to present levels or will be sufficient to cover the costs allocable to patients eligible for reimbursement under these programs. Any changes that lower reimbursement rates under Medicare, Medicaid or private payor programs could negatively affect our business.

Devices used in surgical procedures that are not classified as durable medical equipment, DME, are normally paid directly by the hospital or health care provider and not reimbursed separately by third-party payors. Healthcare providers are, however, reimbursed by third-party payors for the surgical procedures performed using non-DME devices. As a result, these types of devices are subject to intense price competition that can place a small manufacturer at a competitive disadvantage as hospitals and health care providers attempt to negotiate lower prices for products such as the ones we develop and sell. To the extent that any of our products are deemed to be durable medical equipment, they may be subject to distribution under Medicare’s Competitive Acquisition regulations, which could adversely affect the amount that we can seek from payors. Additionally, our business operations and activities may be directly, or indirectly, subject to various federal, state and local healthcare laws, including but not limited to, laws prohibiting kickbacks and false claims. Any changes in the health reimbursement system that lowers reimbursement for surgical procedures using our devices or changes in healthcare laws generally or the enforcement of such laws could materially affect our business.

Most significantly, in March 2010, President Obama signed into law both the Patient Protection and Affordable Care Act and the reconciliation law known as Health Care and Education Affordability Reconciliation Act. We refer to such laws in this prospectus as the “2010 Health Care Reform Legislation.” The constitutionality of the 2010 Health Care Reform Legislation was confirmed on June 28, 2012 by the Supreme Court of the United States. Specifically, the Supreme Court upheld the individual mandate included changes regarding the extension of medical benefits to those who currently lack insurance coverage. Thus, the 2010 Health Care Reform Legislation has changed, and will continue to change, the existing state of the health care system by expanding coverage through voluntary state Medicaid expansion, attracting previously uninsured persons through the new health care insurance exchanges and by modifying the methodology for reimbursing medical services, drugs and devices. These structural changes could entail modifications to the existing system of third-party payors and government programs, such as Medicare and Medicaid, or some combination of both, as well as other changes.

Beyond coverage and reimbursement changes, the 2010 Health Care Reform Legislation subjects manufacturers of medical devices to an excise tax of 2.3% on certain U.S. sales of medical devices beginning in January 2013. This excise tax will likely increase our expenses in the future.

Further, the 2010 Health Care Reform Legislation includes the Physician Payments Sunshine Act, which, in conjunction with its implementing regulations, requires manufacturers of certain drugs, biologics, and devices that are reimbursable by Medicare, Medicaid and the Children’s Health Insurance Program to report certain payments or “transfers of value” provided to physicians and teaching hospitals and to report ownership and investment interests held by physicians and their immediate family members during the preceding calendar year. The Centers for Medicare & Medicaid Services, known as CMS, issued its final rule implementing the Physician

 

16


Table of Contents

Payments Sunshine Act in February 2013, and required data collection commenced as of August 1, 2013. Manufacturers must report aggregated data for August through December of 2013 to CMS in the first quarter of 2014 and more detailed information regarding the specific payments and transfers of value in the second quarter of 2014. CMS will release the data on a public website by September 30, 2014. The Company has complied with its initial reporting obligations under the Physician Payments Sunshine Act and intends to continue to comply with such requirements. The failure to report appropriate data could subject us to significant financial penalties. Other countries and several states currently have similar laws and more may enact similar legislation.

Regulations under the 2010 Health Care Reform Legislation have been, and are expected to continue to be, drafted, released and finalized throughout the next several years. The full impact of the 2010 Health Care Reform Legislation, as well as laws and other reform measures that may be proposed and adopted in the future, remains uncertain, but may continue the downward pressure on medical device pricing, especially under the Medicare program, and may also increase our regulatory burdens and operating costs, which could have a material adverse effect on our business operations.

Finally, we are unable to predict what additional legislation or regulation, if any, relating to the health care industry or third-party coverage and reimbursement may be enacted in the future or what effect such legislation or regulation would have on our business. Any cost containment measures or other health care system reforms that are adopted could have a material and adverse effect on our ability to commercialize our existing and future products successfully.

Even if we receive regulatory clearance or approval to market our products, the market may not be receptive to our products, which could undermine our financial viability.

Even if our products obtain regulatory clearance or approval, resulting products may not gain market acceptance among physicians, patients, health care payors and/or the medical community. To date, we have experienced minimal sales of the AMID stapler and SPIDER System and have not made any sales of the SurgiBot System or the Gastroplasty Device. We have decided to focus our efforts on the development of the SurgiBot System and substantially decreased our SPIDER System sales and stopped sales of the AMID stapler. We believe that the degree of market acceptance of a commercialized product will depend on a number of factors, including:

 

    timing of market introduction of competitive products;

 

    safety and efficacy of our products;

 

    physician training in the use of our products;

 

    prevalence and severity of any side effects;

 

    potential advantages or disadvantages over alternative treatments;

 

    coverage and adequate reimbursement for surgical procedures in which our products are used;

 

    strength of marketing and distribution support; and

 

    price of our future products, both in absolute terms and relative to alternative treatments.

If applicable, for products such as the Gastroplasty Device, availability of coverage and reimbursement from government and other third-party payors can also impact the acceptance of our product offerings.

If our products fail to achieve market acceptance, we may not be able to generate significant revenue or achieve or sustain profitability.

There is significant uncertainty related to the third-party coverage and reimbursement of newly cleared or approved medical devices. Normally, surgical devices are not directly covered; instead, the procedure using the

 

17


Table of Contents

device is subject to a coverage determination by the insurer. We believe that hospitals and ambulatory surgery centers will be our direct customers for our product candidates, and that our revenue is not directly dependent upon the receipt of reimbursement codes or reimbursement coverage by payors. Thus, our customers’ ability to obtain coverage and adequate reimbursement for surgical procedures utilizing our products will affect demand for our current and future products. The commercial success of our existing and future products in both domestic and international markets also may depend in part on the availability of coverage and adequate reimbursement from third-party payors, including government payors, such as the Medicare and Medicaid programs, managed care organizations and other third-party payors. Government and other third-party payors are increasingly attempting to contain health care costs by limiting both coverage and the level of reimbursement for new products and, as a result, they may not cover or provide adequate payment for our existing and future products. These payors may conclude that our products are not as safe or effective as existing devices or that procedures using our devices are not as safe or effective as the existing procedures using other devices. These payors may also conclude that the overall cost of the procedure using one of our devices exceeds the overall cost of the competing procedure using another type of device, and third-party payors may not approve our products for coverage and adequate reimbursement. The failure to obtain coverage and adequate reimbursement for our existing and future products or our customers’ inability to obtain coverage and adequate reimbursement for surgical procedures using our products or health care cost containment initiatives that limit or restrict such reimbursement may reduce any future product revenue.

If we fail to attract and retain key management and scientific personnel, we may be unable to successfully develop or commercialize our products.

We will need to effectively manage our managerial, operational, financial, development, marketing and other resources in order to successfully pursue our research, development and commercialization efforts for our existing and future products. Our success depends on our continued ability to attract, retain and motivate highly qualified management and pre-clinical and clinical personnel. The loss of the services of any of our senior management, particularly Todd M. Pope, Richard M. Mueller and Joseph P. Slattery, could delay or prevent the development or commercialization of our products. We do not maintain “key man” insurance policies on the lives of these individuals or the lives of any of our other employees. We employ these individuals on an at-will basis and their employment can be terminated by us or them at any time, for any reason and with or without notice. We will need to hire additional personnel as we continue to expand our research and development activities and build a sales and marketing organization.

We may not be able to attract or retain qualified management and scientific personnel in the future due to the intense competition for qualified personnel among medical device and other businesses. If we are not able to attract and retain the necessary personnel to accomplish our business objectives, we may experience constraints that will impede significantly the achievement of our research and development objectives, our ability to raise additional capital and our ability to implement our business strategy. In particular, if we lose any members of our senior management team, we may not be able to find suitable replacements in a timely fashion or at all and our business may be harmed as a result.

We have not sought an advisory stockholder vote to approve the compensation of our named executive officers.

Rule 14a-21 under the Exchange Act requires us to seek a separate stockholder advisory vote at our annual meeting at which directors are elected to approve the compensation of our named executive officers, not less frequently than once every three years (say-on-pay vote), and, at least once every six years, to seek a separate stockholder advisory vote on the frequency with which we will submit advisory say-on-pay votes to our stockholders (say-on-frequency vote). In 2013, the year in which Rule 14a-21 became applicable to smaller reporting companies, we did not submit to our stockholders a say-on-pay vote to approve an advisory resolution regarding our compensation program for our named executive officers, or a say-on-frequency vote. Consequently, the Board of Directors has not considered the outcome of our say-on-pay vote results when determining future compensation policies and pay levels for our named executive officers. At our 2014 annual

 

18


Table of Contents

meeting of stockholders, we will be asking our stockholders to vote on a proposal to approve an advisory resolution regarding our compensation program for our named executive officers, and presenting a separate say-on-frequency vote. Following such annual meeting, the Board will consider the outcome of our say-on-pay vote results when determining future compensation policies and pay levels for our named executive officers, and will report on the results of the say-on-pay vote and the say-on-frequency vote as required by applicable SEC rules. In our Annual Report on Form 10-K, as amended, we disclosed that our disclosure controls and procedures did not lead to our identification of the requirement to provide these advisory say-on-pay and say-on-frequency votes, and we adjusted our disclosure controls and procedures processes accordingly.

Because our manufacturing capabilities are limited, we may rely on third parties to manufacture and supply some of our products. An inability to find additional or alternate sources for these products could materially and adversely affect our financial condition and results of operations.

In 2013 we operated manufacturing facilities for production of the SPIDER System and maintained manufacturing facilities for the AMID stapler product. In the future, we may choose to use a third-party manufacturer for our other products. In addition, certain of our SPIDER System product component parts come from third-party suppliers. If these manufacturing partners are unable to produce our products or component parts in the amounts that we require, we may not be able to establish a contract and obtain a sufficient alternative supply from another supplier on a timely basis and in the quantities we require.

Our products require precise, high quality manufacturing. We and our contract manufacturers will be subject to ongoing periodic unannounced inspection by the FDA and non-U.S. regulatory authorities to ensure strict compliance with the FDA’s Quality System Regulation, current “good manufacturing practices” and other applicable government regulations and corresponding standards. If we or our contract manufacturers fail to achieve and maintain high manufacturing standards in compliance with the FDA’s Quality System Regulation, we may experience manufacturing errors resulting in patient injury or death, product recalls or withdrawals, delays or interruptions of production or failures in product testing or delivery, delay or prevention of filing or approval of marketing applications for our products, cost overruns or other problems that could seriously harm our business.

Any performance failure by us or on the part of our contract manufacturers could delay product development or regulatory clearance or approval of our products, or commercialization of our products and future products, depriving us of potential product revenue and resulting in additional losses. In addition, our dependence on any third party for manufacturing could adversely affect our future profit margins. Our ability to replace any then-existing manufacturer may be difficult because the number of potential manufacturers is limited and, in the case of Class III devices, the FDA must approve any replacement manufacturer before manufacturing can begin. It may be difficult or impossible for us to identify and engage a replacement manufacturer on acceptable terms in a timely manner, or at all.

We may become subject to potential product liability claims, and we may be required to pay damages that exceed our insurance coverage.

Our business exposes us to potential product liability claims that are inherent in the design, testing, manufacture, sale and distribution of our products and each of our product candidates that we are seeking to introduce to the market. Surgical medical devices involve significant risks of serious complications, including bleeding, nerve injury, paralysis, infection, and even death. Any product liability claim brought against us, with or without merit, could result in the increase of our product liability insurance rates or in our inability to secure coverage in the future on commercially reasonable terms, if at all. In addition, if our product liability insurance proves to be inadequate to pay a damage award, we may have to pay the excess of this award out of our cash reserves, which could significantly harm our financial condition. If longer-term patient results and experience indicate that our products or any component of a product causes tissue damage, motor impairment or other adverse effects, we could be subject to significant liability. A product liability claim, even one without merit,

 

19


Table of Contents

could harm our reputation in the industry, lead to significant legal fees, and result in the diversion of management’s attention from managing our business.

We currently have a limited sales, marketing and distribution organization. If we are unable to develop our sales, marketing and distribution capability on our own or through collaborations with marketing partners, we will not be successful in commercializing our products.

We currently have limited marketing, sales and distribution capabilities, including a limited number of direct sales representatives. We intend to distribute our products through direct sales and independent contractor and distribution agreements with companies possessing established sales and marketing operations in the medical device industry, but there can be no assurance that we will be successful. To the extent that we enter into co-promotion or other arrangements, our product revenue is likely to be lower than if we directly market or sell our products. In addition, any revenue we receive will depend in whole or in part upon the efforts of such third parties, which may not be successful and are generally not within our control. If we are unable to enter into such arrangements on acceptable terms or at all, we may not be able to successfully commercialize our products. If we are not successful in commercializing our existing and future products, either on our own or through collaborations with one or more third parties, our future product revenue will suffer and we may incur significant additional losses.

For our Gastroplasty Device, we rely on our license with Creighton University, and any loss of our rights under such license agreement, or failure to properly maintain or enforce the patent applications underlying such license agreement, could materially adversely affect our business prospects for the Gastroplasty Device.

The patents and patent applications in our patent portfolio related to the Gastroplasty Device are not owned by us, but are licensed from Creighton University. Presently, we rely on such licensed technology for our Gastroplasty Device and relied on it in developing the SMART Dilator and bite blocks products and may license additional technology from other third parties in the future. The Creighton license agreement gives us rights for the commercial exploitation of the patents resulting from the patent applications, subject to certain provisions of the license agreement. Failure to comply with these provisions could result in the loss of our rights under the Creighton license agreement. Our inability to rely on these patents and patent applications which are the basis of certain aspects of our Gastroplasty Device technology would have an adverse effect on our business.

Further, our success will depend in part on the ability of us, Creighton University and other third-party licensors to obtain, maintain and enforce patent protection for our licensed intellectual property and, in particular, those patents to which we have secured exclusive rights. We, Creighton University or other third-party licensors may not successfully prosecute the patent applications which are licensed to us, may fail to maintain these patents, and may determine not to pursue litigation against other companies that are infringing these patents, or may pursue such litigation less aggressively than necessary to obtain an acceptable outcome from any such litigation. Without protection for the intellectual property we have licensed, other companies might be able to offer substantially identical products for sale, which could materially adversely affect our competitive business position, business prospects and results of operations.

If we or our licensors are unable to obtain and enforce patent protection for our products, our business could be materially harmed.

Our success depends, in part, on our ability to protect proprietary methods and technologies that we develop or license under the patent and other intellectual property laws of the United States and other countries, so that we can prevent others from unlawfully using our inventions and proprietary information. However, we may not hold proprietary rights to some patents required for us to commercialize our proposed products. We have numerous patent applications that are in process. For example, with respect to the SPIDER System, the SurgiBot System and other medical devices that we have invented, we have three issued patents and we have filed over 30 patent applications in the United States and abroad. To our knowledge, one patent within the technology we have

 

20


Table of Contents

licensed has been patented in the U.S. Because certain U.S. patent applications are confidential until patents issue, such as applications filed prior to November 29, 2000, or applications filed after such date which will not be filed in foreign countries, third parties may have filed patent applications for technology covered by our pending patent applications without our being aware of those applications, and our patent applications may not have priority over those applications. For this and other reasons, we or our third-party collaborators may be unable to secure desired patent rights, thereby losing desired exclusivity. If licenses are not available to us on acceptable terms, we will not be able to market the affected products or conduct the desired activities, unless we challenge the validity, enforceability or infringement of the third-party patent or otherwise circumvent the third-party patent.

Our strategy depends on our ability to promptly identify and seek patent protection for our discoveries. In addition, we will rely on third-party collaborators to file patent applications relating to proprietary technology that we develop jointly during certain collaborations. The process of obtaining patent protection is expensive and time-consuming. If we or our present or future collaborators fail to file and prosecute all necessary and desirable patent applications at a reasonable cost and in a timely manner, our business will be adversely affected. Despite our efforts and the efforts of our collaborators to protect our proprietary rights, unauthorized parties may be able to develop and use information that we regard as proprietary.

The issuance of a patent provides a presumption, but does not guarantee that it is valid. Any patents we have obtained, or obtain in the future, may be challenged or potentially circumvented. Moreover, the United States Patent and Trademark Office, or the USPTO, may commence interference proceedings involving our patents or patent applications. Any such challenge to our patents or patent applications would be costly, would require significant time and attention of our management and could have a material adverse effect on our business. In addition, future court decisions may introduce uncertainty in the enforceability or scope of any patent, including those owned by medical device companies.

Our pending patent applications may not result in issued patents. The patent position of medical device companies, including ours, is generally uncertain and involves complex legal and factual considerations. The standards that the USPTO and its foreign counterparts use to grant patents are not always applied predictably or uniformly and can change. There is also no uniform, worldwide policy regarding the subject matter and scope of claims granted or allowable in medical device patents. Accordingly, we do not know the degree of future protection for our proprietary rights or the breadth of claims that will be allowed in any patents issued to us or to others. The legal systems of certain countries do not favor the aggressive enforcement of patents, and the laws of foreign countries may not protect our rights to the same extent as the laws of the United States. Therefore, the enforceability or scope of our owned or licensed patents in the United States or in foreign countries cannot be predicted with certainty, and, as a result, any patents that we own or license may not provide sufficient protection against competitors. We may not be able to obtain or maintain patent protection for our pending patent applications, those we may file in the future, or those we may license from third parties, including Creighton University.

We cannot assure you that any patents that will issue, that may issue or that may be licensed to us will be enforceable or valid or will not expire prior to the commercialization of our products, thus allowing others to more effectively compete with us. Therefore, any patents that we own or license may not adequately protect our future products.

If we or our licensors are unable to protect the confidentiality of our proprietary information and know-how, the value of our technology and products could be adversely affected.

In addition to patent protection, we also rely on other proprietary rights, including protection of trade secrets, know-how and confidential and proprietary information. To maintain the confidentiality of trade secrets and proprietary information, we will seek to enter into confidentiality agreements with our employees, consultants and collaborators upon the commencement of their relationships with us. These agreements generally require that

 

21


Table of Contents

all confidential information developed by the individual or made known to the individual by us during the course of the individual’s relationship with us be kept confidential and not disclosed to third parties. Our agreements with employees also generally provide and will generally provide that any inventions conceived by the individual in the course of rendering services to us shall be our exclusive property. However, we may not obtain these agreements in all circumstances, and individuals with whom we have these agreements may not comply with their terms. In the event of unauthorized use or disclosure of our trade secrets or proprietary information, these agreements, even if obtained, may not provide meaningful protection, particularly for our trade secrets or other confidential information. To the extent that our employees, consultants or contractors use technology or know-how owned by third parties in their work for us, disputes may arise between us and those third parties as to the rights in related inventions. Adequate remedies may not exist in the event of unauthorized use or disclosure of our confidential information. The disclosure of our trade secrets would impair our competitive position and may materially harm our business, financial condition and results of operations.

Our commercial success depends significantly on our ability to operate without infringing the patents and other proprietary rights of third parties.

Other entities may have or obtain patents or proprietary rights that could limit our ability to manufacture, use, sell, offer for sale or import products or impair our competitive position. In addition, to the extent that a third party patents or develops new technology that covers our products, we may be required to obtain licenses to that technology, which licenses may not be available or may not be available on commercially reasonable terms, if at all. If licenses are not available to us on acceptable terms, we will not be able to market the affected products or conduct the desired activities, unless we challenge the validity, enforceability or infringement of the third-party patent or circumvent the third-party patent, which would be costly and would require significant time and attention of our management. Third parties may have or obtain valid and enforceable patents or proprietary rights that could block us from developing products using our technology. Our failure to obtain a license to any technology that we require may materially harm our business, financial condition and results of operations.

If we become involved in patent litigation or other proceedings related to a determination of rights, we could incur substantial costs and expenses, substantial liability for damages or be required to stop our product development and commercialization efforts, any of which could materially adversely affect our liquidity, business prospects and results of operations.

Third parties may sue us for infringing their patent rights. Likewise, we may need to resort to litigation to enforce a patent issued or licensed to us or to determine the scope and validity of proprietary rights of others. In addition, a third party may claim that we have improperly obtained or used its confidential or proprietary information. Furthermore, in connection with our third-party license agreements, we generally have agreed to indemnify the licensor for costs incurred in connection with litigation relating to intellectual property rights. The cost to us of any litigation or other proceeding relating to intellectual property rights, even if resolved in our favor, could be substantial, and the litigation would divert our management’s efforts. Some of our competitors may be able to sustain the costs of complex patent litigation more effectively than we can because they have substantially greater resources. Uncertainties resulting from the initiation and continuation of any litigation could limit our ability to continue our operations.

If any parties successfully claim that our creation or use of proprietary technologies infringes upon their intellectual property rights, we might be forced to pay damages, potentially including treble damages, if we are found to have willfully infringed on such parties’ patent rights. In addition to any damages we might have to pay, a court could require us to stop the infringing activity or obtain a license. Any license required under any patent may not be made available on commercially acceptable terms, if at all. In addition, such licenses are likely to be non-exclusive and, therefore, our competitors may have access to the same technology licensed to us. If we fail to obtain a required license and are unable to design around a patent, we may be unable to effectively market some of our technology and products, which could limit our ability to generate revenues or achieve profitability and possibly prevent us from generating revenue sufficient to sustain our operations.

 

22


Table of Contents

Our business may become subject to economic, political, regulatory and other risks associated with domestic and international operations.

Our business is subject to risks associated with conducting business domestically and internationally, in part due to some of our suppliers being located outside the U.S. Accordingly, our future results could be harmed by a variety of factors, including:

 

    difficulties in compliance with U.S. and non-U.S. laws and regulations;

 

    changes in U.S. and non-U.S. regulations and customs;

 

    changes in non-U.S. currency exchange rates and currency controls;

 

    changes in a specific country’s or region’s political or economic environment;

 

    trade protection measures, import or export licensing requirements or other restrictive actions by U.S. or non-U.S. governments;

 

    negative consequences from changes in tax laws; and

 

    difficulties associated with staffing and managing foreign operations, including differing labor relations.

We may be required to recognize impairment charges for our goodwill and other intangible assets.

As of December 31, 2013, the net carrying value of our goodwill and other intangible assets totaled approximately $96.6 million, which represents approximately 82.8% of our total assets. In accordance with generally accepted accounting principles, we periodically assess these assets to determine if they are impaired. Significant negative industry or economic trends, disruptions to our business, inability to effectively integrate acquired businesses, unexpected significant changes or planned changes in use of the assets, divestitures and market capitalization declines may impair our goodwill and other intangible assets. Any charges relating to such impairments would adversely affect our results of operations in the periods recognized.

In connection with the September 2013 merger transaction, we entered into lock-up and voting agreements with certain of our stockholders pursuant to which such stockholders agreed not to transfer their shares for designated periods and to vote to approve certain corporate actions following the merger.

In connection with the merger and the private placement financing described in this prospectus, each of the investors participating in the private placement, the largest stockholders of each of SafeStitch and TransEnterix Surgical prior to the merger (many of whom were investors in the private placement), and members of our Board of Directors, agreed to enter into a lock-up and voting agreement, pursuant to which such persons agreed not to sell, transfer or otherwise convey any of the Company’s securities held by them for designated periods following the merger closing date. The total number of our shares subject to the lock-up and voting agreements at the time of the merger was 45,367,165 shares, comprising approximately 93% of our stock on the effective date of the merger. The lock-up and voting agreements provide that such persons may sell, transfer or convey: (1) up to 50% of the locked-up shares (22,683,583 shares) after September 3, 2014 (the one-year anniversary of the merger closing date); (2) an additional 11,341,791 shares after March 3, 2015 (the eighteen-month anniversary of the merger closing date); and (3) the remaining 11,341,791 shares on September 3, 2015 (the two-year anniversary of the merger closing date). The restrictions on transfer contained in the lock-up and voting agreements cease to apply to all of the locked-up shares following the second anniversary of the merger closing date. These limitations may add to the low volume of shares of our common stock that trade on the OTCBB during the time periods described.

Any waiver of the lock-up restrictions under a lock-up and voting agreement requires the consent of the Company and all of the investors party to the lock-up and voting agreements.

 

23


Table of Contents

Additionally, pursuant to the lock-up and voting agreements, each investor who signed an agreement agreed, for the period commencing on the merger closing date and ending on September 3, 2014, to vote all of such investor’s shares in favor of: (i) amending our Amended and Restated Certificate of Incorporation to change our name to “TransEnterix, Inc.”; (ii) effecting a reverse stock split of the common stock on terms approved by our Board of Directors; and (iii) amending our 2007 Incentive Compensation Plan in order to increase the number of shares of common stock available for issuance. The corporate actions described in (i) and (iii) above were approved by a majority of stockholders and effected on December 6, 2013. The corporate action described in (ii) above was approved by a majority of our stockholders on February 12, 2014. Therefore, all voting requirements under the lock-up and voting agreements have been completed as of the date of this prospectus.

Risks Related to Offerings under this Prospectus and our Common Stock

The market price of our common stock has been, and may continue to be, highly volatile, and such volatility could cause the market price of our common stock to decrease and could cause you to lose some or all of your investment in our common stock.

During the two years ended December 31, 2013, the market price of our common stock fluctuated from a high of $8.90 per share to a low of $1.05 per share, and our stock price continues to fluctuate. The market price of our common stock may continue to fluctuate significantly in response to numerous factors, some of which are beyond our control, such as:

 

    the announcement of new products or product enhancements by us or our competitors;

 

    developments concerning intellectual property rights and regulatory approvals;

 

    variations in our and our competitors’ results of operations;

 

    changes in earnings estimates or recommendations by securities analysts, if our common stock is covered by analysts;

 

    developments in the medical device industry;

 

    the results of product liability or intellectual property lawsuits;

 

    future issuances of common stock or other securities;

 

    the addition or departure of key personnel;

 

    announcements by us or our competitors of acquisitions, investments or strategic alliances; and

 

    general market conditions and other factors, including factors unrelated to our operating performance.

Further, the stock market in general, and the market for medical device companies in particular, has recently experienced extreme price and volume fluctuations. The volatility of our common stock is further exacerbated due to its low trading volume. Continued market fluctuations could result in extreme volatility in the price of our common stock, which could cause a decline in the value of our common stock and the loss of some or all of your investment.

Our Board of Directors has the authority, under Delaware law, to approve the issuance of additional shares of our common stock, or shares of our preferred stock, that are authorized for issuance but not yet issued, without the need for stockholder approval. As of March 28, 2014, there were 750,000,000 shares of common stock authorized for issuance and 25,000,000 shares of preferred stock authorized for issuance, and 48,855,385 shares of common stock and zero shares of preferred stock outstanding. Any approval by our Board of Directors of the issuance of additional shares of common stock or preferred stock is likely to have an immediate and substantial dilutive effect on the percentage ownership of the holders of our outstanding shares. As described below, we have filed an application to list our common stock on the NYSE MKT. If such listing occurs, we will be subject to the listing rules of the NYSE MKT, which include stockholder approval requirements for issuances of

 

24


Table of Contents

common stock exceeding 20% of the then-outstanding shares of common stock in transactions other than public offerings. However, until such listing occurs, such stockholder approval requirement is not applicable to us.

We are in the process of effecting a reverse stock split of our common stock, which could result in increased volatility in the price and trading volume of our common stock and cause a decline in the value of our common stock.

On February 12, 2014, the holders of approximately 66% of our voting securities authorized a Certificate of Amendment to our Amended and Restated Certificate of Incorporation to effect a reverse stock split in the range of one-for-two to one-for-ten, with the actual ratio to be determined within such range by the Board of Directors in its sole discretion. Subsequently, the Board of Directors approved a one-for-five reverse stock split of our common stock. On March 31, 2014, we filed the Certificate of Amendment to our Certificate of Incorporation to effect the reverse stock split.

The reverse stock split was contemplated in connection with our application to list our common stock for trading on the NYSE MKT to assist in meeting the NYSE MKT minimum bid price requirement of a stock price of at least $2.00 per share. We believe the one-for-five reverse stock split will allow us to achieve and maintain a stock price above the minimum bid requirements, but we cannot provide assurance that such stock price will be maintained. We submitted an application to have our common stock listed for trading on the NYSE MKT on March 17, 2014. On April 1, 2014, we received authorization to list our shares on the NYSE MKT, subject to completion of a public offering of common stock and meeting all relevant quantitative and qualitative listing criteria of the NYSE MKT. Although we believe our common stock will be accepted for listing on the NYSE MKT, we cannot assure you that we will be able to sustain such listing.

The reverse stock split will not result in any change in a stockholder’s economic interest in the Company, but stockholders may not view the reverse stock split in a favorable manner. If the reverse stock split is not viewed favorably by stockholders, this could result in increased volatility in the price and trading volume of our common stock, which could also cause a decline in the value of our common stock. There can be no assurance that the per share market price of our common stock following the reverse stock split will increase and be maintained in proportion to the reduction in the number of shares of our common stock outstanding before the reverse stock split.

While the Board of Directors believes that a higher stock price per share, and a lower number of outstanding shares may help generate investor interest, there can be no assurance that the reverse stock split will result in a per-share price that will attract institutional investors or investment funds or that such share price will satisfy the investing guidelines of institutional investors or investment funds. As a result, the trading liquidity of our common stock may not necessarily improve.

Trading of our common stock is limited, and trading restrictions imposed on us by applicable regulations may further reduce trading in our common stock, making it difficult for our stockholders to sell their shares; and future sales of common stock could reduce our stock price.

Trading of our common stock is currently conducted on the OTC Bulletin Board, or OTCBB. The liquidity of our common stock is limited, not only in terms of the number of shares that can be bought and sold at a given price, but also as it may be adversely affected by delays in the timing of transactions and reduction in security analysts’ and the media’s coverage of us, if at all. As described above, the holders of approximately 93% of our outstanding stock at the time of the merger agreed to lock-up restrictions on such shares until at least September 3, 2014. In addition, as of the date of this prospectus approximately 65% of the issued and outstanding shares of our common stock are held by officers, directors and beneficial owners of at least 10% of our outstanding shares. These holders are subject to certain restrictions, including transfer restrictions set forth in the lock-up and voting agreements, and restrictions imposed by the Securities Act with regard to trading our common stock. These factors may result in different prices for our common stock than might otherwise be obtained in a more liquid market and could also result in a larger spread between the bid and asked prices for our

 

25


Table of Contents

common stock. In addition, without a large public float, our common stock is less liquid than the stock of companies with broader public ownership, and, as a result, the trading prices of our common stock may be more volatile. In the absence of an active public trading market, an investor may be unable to liquidate his investment in our common stock. Trading of a relatively small volume of our common stock may have a greater impact on the trading price of our stock than would be the case if our public float were larger. We cannot predict the prices at which our common stock will trade in the future, if at all.

Sales by stockholders of substantial amounts of our shares of common stock, the issuance of new shares of common stock by us or the perception that these sales may occur in the future could materially and adversely affect the market price of our common stock, and you may lose all or a portion of your investment in our common stock.

Because our common stock may be a “penny stock,” it may be more difficult for investors to sell shares of our common stock, and the market price of our common stock may be adversely affected.

Our common stock may be a “penny stock” if, among other things, the stock price is below $5.00 per share, it is not listed on a national securities exchange or approved for quotation on the Nasdaq Stock Market or any other national stock exchange or it has not met certain net tangible asset or average revenue requirements. Broker-dealers who sell penny stocks must provide purchasers of these stocks with a standardized risk-disclosure document prepared by the SEC. This risk-disclosure document provides information about penny stocks and the nature and level of risks involved in investing in the penny-stock market. A broker must also give a purchaser, orally or in writing, bid and offer quotations and information regarding broker and salesperson compensation, make a written determination that the penny stock is a suitable investment for the purchaser and obtain the purchaser’s written agreement to the purchase. Broker-dealers must also provide customers that hold penny stock in their accounts with such broker-dealer a monthly statement containing price and market information relating to the penny stock. If a penny stock is sold to an investor in violation of the penny stock rules, the investor may be able to cancel its purchase and get its money back.

If applicable, the penny stock rules may make it difficult for investors to sell their shares of our common stock. Because of the rules and restrictions applicable to a penny stock, there is less trading in penny stocks and the market price of our common stock may be adversely affected. Also, many brokers choose not to participate in penny stock transactions. Accordingly, investors may not always be able to resell their shares of our common stock publicly at times and prices that they feel are appropriate.

Directors, executive officers, principal stockholders and affiliated entities own a significant percentage of our capital stock, and they may make decisions that you do not consider to be in the best interests of our stockholders.

As of the date of this prospectus, our directors, executive officers, principal stockholders and affiliated entities beneficially own, in the aggregate, approximately 65% of our outstanding common stock. As a result, if some or all of them acted together, they would have the ability to exert substantial influence over the election of our Board of Directors and the outcome of issues requiring approval by our stockholders. This concentration of ownership may also have the effect of delaying or preventing a change in control of the Company that may be favored by other stockholders. This could prevent transactions in which stockholders might otherwise recover a premium for their shares over current market prices.

Our management will have broad discretion as to the use of the proceeds of offerings under this prospectus.

We have not designated the amount of net proceeds we will receive from an offering under this prospectus for any particular purpose. Accordingly, our management will have broad discretion as to the application of net proceeds. Our stockholders may not agree with the manner in which our management chooses to allocate and spend the net proceeds.

 

26


Table of Contents

We may issue preferred stock in the future, and the terms of the preferred stock may reduce the value of our common stock.

We are authorized to issue shares of preferred stock in one or more series. Our Board of Directors may determine the terms of future preferred stock offerings without further action by our stockholders. If we issue preferred stock, it could affect your rights or reduce the value of our outstanding common stock. In particular, specific rights granted to future holders of preferred stock may include voting rights, preferences as to dividends and liquidation, conversion and redemption rights, sinking fund provisions, and restrictions on our ability to merge with or sell our assets to a third party.

We do not expect to pay any cash dividends on our common stock.

We have not declared or paid any cash dividends on our common stock or other securities, and we currently do not anticipate paying any cash dividends in the foreseeable future. Because we do not anticipate paying cash dividends for the foreseeable future, our stockholders will not realize a return on their investment in our common stock except to the extent of any appreciation in the value of our common stock. Our common stock may not appreciate in value, or may decline in value.

USE OF PROCEEDS

Unless otherwise indicated in the applicable prospectus supplement, we intend to use the net proceeds from the sale of the securities under this prospectus together with our existing cash resources, for working capital and other general corporate purposes. At this time, we have not determined the specific uses of any offering proceeds, or the amounts we plan to spend on any particular use or the timing of such expenditures, which may vary significantly depending on various factors such as our research and development activities, regulatory approvals, competition, marketing and sales, and the market acceptance of any products introduced by us or our partners. Pending application of the net proceeds from any particular offering, we intend to invest such proceeds in short-term, interest-bearing, investment-grade securities.

Each time we issue securities, we will provide a prospectus supplement that will contain information about how we intend to use the proceeds from each such offering.

We cannot guarantee that we will receive any proceeds in connection with any offering hereunder because we may choose not to issue any of the securities covered by this prospectus.

PLAN OF DISTRIBUTION

We may sell the securities being offered hereby from time to time in one or more of the following ways:

 

    through one or more underwriters;

 

    through dealers, who may act as agents or principal (including a block trade in which a broker or dealer so engaged will attempt to sell the shares as agent but may position and resell a portion of the block as principal to facilitate the transaction);

 

    directly to one or more purchasers;

 

    through agents;

 

    through registered direct offerings;

 

    as part of a collaboration with a third party;

 

    through “at the market” offerings, within the meaning of Rule 415(a)(4) of the Securities Act, to or through a market maker or into an existing trading market on an exchange or otherwise;

 

27


Table of Contents
    in privately negotiated transactions; and

 

    in any combination of these methods of sale.

We will set forth in a prospectus supplement the terms of the offering of securities, including:

 

    the name or names of any agents, underwriters or dealers;

 

    the terms of the securities being offered, including the purchase price and the proceeds we will receive from the sale;

 

    any underwriting discounts and commissions or agency fees and other items constituting underwriters’ or agents’ compensation;

 

    any over-allotment options under which underwriters may purchase additional securities from us; and

 

    any discounts or concessions allowed or reallowed or paid to dealers.

The distribution of the securities may be effected from time to time in one or more transactions at a fixed price or prices, which may be changed, at market prices prevailing at the time of sale, at prices related to the prevailing market prices, or at negotiated prices.

Underwriters, dealers, agents and others that participate in the distribution of the securities may be underwriters as defined in the Securities Act and any discounts or commissions they receive from us and any profit on their resale of the securities may be treated as underwriting discounts and commissions under the Securities Act. In no event will the total amount of cash compensation paid to underwriters, placement agents, dealers or brokers exceed 10% of the gross proceeds of the offering. We will identify in the applicable prospectus supplement any underwriters, dealers, agents and others and will describe their compensation. We may have agreements with underwriters, dealers, agents and others to indemnify them against specified civil liabilities, including liabilities under the Securities Act. Underwriters, dealers, agents and others may engage in transactions with or perform services for us in the ordinary course of their businesses.

If required under applicable state securities laws, we will sell the securities only through registered or licensed brokers or dealers. In addition, in some states, we may not sell securities unless they have been registered or qualified for sale in the applicable state or unless we have complied with an exemption from any registration or qualification requirements.

Agents

We may designate agents who agree to solicit purchases for the period of their appointment or to sell securities on a continuing basis. Unless the prospectus supplement provides otherwise, agents will act on a best efforts basis for the period of their appointment. Agents may receive compensation in the form of commissions, discounts or concessions from us. Agents may also receive compensation from the purchasers of the securities for whom they sell as principals. Each particular agent will receive compensation in amounts negotiated in connection with the sale, which might be in excess of customary commissions.

Underwriters

If we use underwriters for a sale of securities, the underwriters will acquire the securities for their own account. The underwriters may resell the securities in one or more transactions, including negotiated transactions, at a fixed public offering price or at varying prices determined at the time of sale. The obligations of the underwriters to purchase the securities will be subject to the conditions set forth in the applicable underwriting agreement. Unless the prospectus supplement provides otherwise, underwriters will be obligated to purchase all of the securities offered by the prospectus supplement. We may change from time to time any initial public offering price and any discounts or concessions the underwriters allow or reallow or pay to dealers. We may use

 

28


Table of Contents

underwriters with whom we have a material relationship, and we may offer the securities to the public through an underwriting syndicate or through a single underwriter. We will describe in the prospectus supplement naming the underwriter the nature of any such relationship and underwriting arrangement.

Dealers

We also may sell securities to a dealer as principal. If we sell our securities to a dealer as a principal, then the dealer may resell those securities to the public at varying prices to be determined by such dealer at the time of resale. The name of the dealer and the terms of the transactions will be set forth in the applicable prospectus supplement.

Direct Sales and Institutional Purchases

We may also sell securities directly to one or more purchasers, in which case underwriters or agents would not be involved in the transaction.

Further, we may authorize agents, underwriters or dealers to solicit offers by certain types of institutional investors to purchase securities from us at the public offering price set forth in the prospectus supplement pursuant to delayed delivery contracts providing for payment and delivery on a specified date in the future. We will describe the conditions to these contracts and the commissions we must pay for solicitation of these contracts in an applicable prospectus supplement.

Stabilization Activities

Any underwriter may engage in overallotment, stabilizing transactions, short covering transactions and penalty bids in accordance with Regulation M under the Exchange Act.

Overallotment involves sales in excess of the offering size, which create a short position. Stabilizing transactions permit bids to purchase the underlying security so long as the stabilizing bids do not exceed a specified maximum. Short covering transactions involve purchases in the open market after the distribution is completed to cover short positions. Penalty bids permit the underwriters to reclaim a selling concession from a dealer when the securities originally sold by the dealer are purchased in a covering transaction to cover short positions. Such activities may cause the price of the securities to be higher than they would otherwise be. If commenced, the underwriters may discontinue any of the activities at any time. These transactions may be effected on the OTC Bulletin Board or otherwise.

Passive Market Making

Any underwriters who are qualified market makers on the OTC Bulletin Board may engage in passive market making transactions on the OTC Bulletin Board in accordance with Rule 103 of Regulation M, during the business day prior to the pricing of the offering, before the commencement of offers or sales. Passive market makers must comply with applicable volume and price limitations and must be identified as passive market makers. In general, a passive market maker must display its bid at a price not in excess of the highest independent bid for such security; if all independent bids are lowered below the passive market maker’s bid, however, the passive market maker’s bid must then be lowered when certain purchase limits are exceeded.

Costs

We will bear all costs, expenses and fees in connection with the registration of the securities, as well as the expense of all commissions and discounts, if any, attributable to sales of the securities by us.

 

29


Table of Contents

DESCRIPTION OF CAPITAL STOCK

Our authorized capital stock consists of 750,000,000 shares of common stock, par value $0.001 per share and 25,000,000 shares of preferred stock, par value $0.01 per share.

Common Stock

Of the authorized common stock, as of March 28, 2014, there are 48,855,385 shares outstanding and there are 6,056,715 shares of our common stock reserved for the exercise of outstanding stock options, warrants and restricted stock units. There were approximately 280 record holders as of February 28, 2014. Subject to the prior rights of the holders of any shares of preferred stock which may be issued in the future, the holders of our common stock are entitled to receive dividends from our funds legally available therefor when, as and if declared by our Board of Directors, and are entitled to share ratably in all of our assets available for distribution to holders of our common stock upon the liquidation, dissolution or winding-up of our affairs, subject to the liquidation preference, if any, of any then outstanding shares of preferred stock. Holders of our common stock do not have any preemptive, subscription, redemption or conversion rights. Holders of our common stock are entitled to one vote per share on all matters which they are entitled to vote upon at meetings of stockholders or upon actions taken by written consent pursuant to Delaware corporate law. The holders of our common stock do not have cumulative voting rights, which mean that the holders of a plurality of the outstanding shares can elect all of our directors. All of the shares of our common stock currently issued and outstanding are fully-paid and nonassessable. No dividends have been paid to holders of our common stock since our incorporation, and no cash dividends are anticipated to be declared or paid in the reasonably foreseeable future.

Transfer Agent.

The transfer agent for our common stock is Continental Stock & Transfer Company.

Listing.

The shares of our common stock are currently listed on the OTC Bulletin Board under the symbol “TRXC.” Due to the reverse stock split, beginning April 2, 2014 and continuing for 20 business days or until our listing on the NYSE MKT, whichever occurs first, our stock will trade under the symbol “TRXCD.”

Preferred Stock

Our Board has the authority, without further action by the holders of the outstanding common stock, to issue preferred stock from time to time in one or more classes or series, to fix the number of shares constituting any class or series and the stated value thereof, if different from the par value, as to fix the terms of any such series or class, including dividend rights, dividend rates, conversion or exchange rights, voting rights, rights and terms of redemption (including sinking fund provisions), the redemption price and the liquidation preference of such class or series.

Anti-Takeover Effects of Certain Provisions of our Certificate of Incorporation, our By-Laws and Delaware Law

Delaware Statute

We are subject to Section 203 of the Delaware General Corporation Law, which prohibits a publicly held Delaware corporation from engaging in a “business combination” with an “interested stockholder” for a period of three years after the date of the transaction in which the person became an interested stockholder, unless:

 

    prior to such date, our board of directors approves either the business combination or the transaction that resulted in the stockholder’s becoming an interested stockholder;

 

30


Table of Contents
    upon consummation of the transaction that resulted in the stockholder becoming an interested stockholder, the interested stockholder owns at least 85% of our outstanding voting stock, excluding shares held by directors, officers and certain employee stock plans; or

 

    on or after the consummation date, the business combination is approved by our board of directors and by the affirmative vote at an annual or special meeting of stockholders holding of at least two-thirds of our outstanding voting stock that is not owned by the interested stockholder.

For purposes of Section 203, a “business combination” includes, among other things, a merger, asset sale or other transaction resulting in a financial benefit to the interested stockholder, and an “interested stockholder” is generally a person who, together with affiliates and associates of such person:

 

    owns 15% or more of outstanding voting stock; or

 

    is an affiliate or associate of ours and was the owner of 15% or more of our outstanding voting stock at any time within the prior three years.

Certificate of Incorporation and Bylaw Provisions

Our amended and restated certificate of incorporation and amended and restated bylaws include provisions that, among others, could have the effect of delaying, deferring or discouraging potential acquisition proposals and could delay or prevent a change of control of us. The provisions in our certificate of incorporation and bylaws that may have such effect include:

 

    Preferred Stock. As noted above, our board of directors, without stockholder approval, has the authority under our certificate of incorporation to issue preferred stock with rights superior to the rights of the holders of common stock. As a result, we could issue preferred stock quickly and easily, which could adversely affect the rights of holders of our common stock and could be issued with terms calculated to delay or prevent a change of control or make removal of management more difficult.

 

    Stockholder Meetings. Under our certificate of incorporation, as amended, and bylaws, special meetings of our stockholders may be called only by the vote of a majority of the entire Board of Directors or the chairman of the Board of Directors. Our stockholders may not call a special meeting of the stockholders.

 

    Requirements for Advance Notification of Stockholder Nominations and Proposals. Our bylaws establish advance notice procedures with respect to stockholder proposals and the nomination of candidates for election as directors, other than nominations made by or at the direction of our Board of Directors or a committee thereof.

DESCRIPTION OF DEBT SECURITIES

General

The debt securities that we may issue will constitute debentures, notes, bonds or other evidences of indebtedness of the Company, to be issued in one or more series. The particular terms of any series of debt securities we offer, including the extent to which the general terms set forth below may be applicable to a particular series, will be described in a prospectus supplement relating to such series.

Debt securities that we may issue will be issued under an indenture between us and a trustee qualified to act as such under the Trust Indenture Act of 1939. When we refer to the “indenture” in this prospectus, we are referring to the indenture under which debt securities are issued as supplemented by any supplemental indenture applicable to such debt securities. We will provide the name of the trustee in any prospectus supplement related to the issuance of debt securities, and we will also provide certain other information related to the trustee, including describing any relationship we have with the trustee, in such prospectus supplement.

 

31


Table of Contents

Unless otherwise specified in a prospectus supplement, the debt securities will be direct secured or unsecured obligations of the Company. The senior debt securities will rank equally with any of our other unsecured senior and unsubordinated debt. The subordinated debt securities will be subordinate and junior in right of payment to any senior indebtedness.

We may issue debt securities from time to time in one or more series, in each case with the same or various maturities, at par or at a discount. Unless indicated in a prospectus supplement, we may issue additional debt securities of a particular series without the consent of the holders of the debt securities of such series outstanding at the time of the issuance. Any such additional debt securities, together with all other outstanding debt securities of that series, will constitute a single series of debt securities under the applicable indenture and will be equal in ranking.

The following statements relating to the debt securities and the indenture are summaries and do not purport to be complete, and are subject in their entirety to the detailed provisions of the indenture.

Information to be provided in a Prospectus Supplement

The prospectus supplement would set forth the following terms of the debt securities in respect of which this prospectus is delivered:

 

    the title and denominations of the debt securities of the series;

 

    any limit on the aggregate principal amount of the debt securities of the series;

 

    the date or dates on which the principal and premium, if any, with respect to the debt securities of the series are payable or the method of determination thereof;

 

    the rate or rates, which may be fixed or variable, at which the debt securities of the series shall bear interest, if any, or the method of calculating and/or resetting such rate or rates of interest;

 

    the dates from which such interest shall accrue or the method by which such dates shall be determined and the duration of the extensions and the basis upon which interest shall be calculated;

 

    the interest payment dates for the series of debt securities or the method by which such dates will be determined, the terms of any deferral of interest and any right of ours to extend the interest payments periods;

 

    the terms and conditions upon which debt securities of the series may be redeemed, in whole or in part, at our option or otherwise;

 

    our obligation, if any, to redeem, purchase, or repay debt securities of the series pursuant to any sinking fund or other specified event or at the option of the holders and the terms of any such redemption, purchase, or repayment;

 

    the terms, if any, upon which the debt securities of the series may be convertible into or exchanged for preferred stock or common stock, including, among other things, the initial conversion or exchange price or rate and the conversion or exchange period;

 

    if the amount of principal, premium, if any, or interest with respect to the debt securities of the series may be determined with reference to an index or formula, the manner in which such amounts will be determined;

 

    if any payments on the debt securities of the series are to be made in a currency or currencies (or by reference to an index or formula) other than that in which such securities are denominated or designated to be payable, the currency or currencies (or index or formula) in which such payments are to be made and the terms and conditions of such payments;

 

    any changes or additions to the provisions of the indenture dealing with defeasance, including any additional covenants that may be subject to our covenant defeasance option;

 

32


Table of Contents
    the currency or currencies in which payment of the principal and premium, if any, and interest with respect to debt securities of the series will be payable, or in which the debt securities of the series shall be denominated, and the particular provisions applicable thereto in accordance with the indenture;

 

    the portion of the principal amount of debt securities of the series which will be payable upon declaration of acceleration or provable in bankruptcy or the method by which such portion or amount shall be determined;

 

    whether the debt securities of the series will be secured and, if so, on what terms;

 

    any events of default with respect to the debt securities of the series;

 

    the identity of any trustees, authenticating or paying agents, transfer agents or registrars;

 

    the applicability of, and any addition to or change in, the covenants currently set forth in the indenture;

 

    the subordination, ranking or priority, if any, of the debt securities of the series and terms of the subordination;

 

    any other terms of the debt securities of the series which are not prohibited by the indenture; and

 

    whether securities of the series shall be issuable as registered securities or bearer securities (with or without interest coupons), and any restrictions applicable to the offering, sale or delivery of such bearer securities and the terms upon which such bearer securities of a series may be exchanged for registered securities, and vice versa.

Interest Rate

Debt securities that bear interest will do so at a fixed rate or a floating rate. We may sell, at a discount below the stated principal amount, any debt securities which bear no interest or which bear interest at a rate that at the time of issuance is below the prevailing market rate. The relevant prospectus supplement will describe the special United States federal income tax considerations applicable to any discounted debt securities and any debt securities issued at par which are treated as having been issued at a discount for United States federal income tax purposes.

Transfer and Exchange

We may issue debt securities that would be represented by either:

(a) “book-entry securities,” which means that there will be one or more global securities registered in the name of The Depository Trust Company, as depository, or a nominee of the depository; or

(b) “certificated securities,” which means that they will be represented by a certificate issued in definitive registered form.

We would specify in the prospectus supplement applicable to a particular offering whether the debt securities offered will be book-entry or certificated securities. Except as set forth under “Global Debt Securities and Book-Entry System” below, book-entry debt securities would not be issuable in certificated form.

Certificated Debt Securities

If you hold certificated debt securities that have been offered by this prospectus, you may transfer or exchange them at the trustee’s office or at the paying agency in accordance with the terms of the indenture. You would not be charged a service charge for any transfer or exchange of certificated debt securities, but may be required to pay an amount sufficient to cover any tax or other governmental charge payable in connection with the transfer or exchange.

 

33


Table of Contents

The transfer of certificated debt securities and of the right to receive the principal of, premium and/or interest, if any, on your certificated debt securities can occur only by surrendering the certificate representing your certificated debt securities and having us or the trustee issue a new certificate to the new holder.

Global Debt Securities and Book–Entry System

If we decided to issue debt securities in the form of one or more global securities, then we would register the global securities in the name of the depository for the global securities or in the nominee of the depository, and the global securities would be delivered by the trustee to the depository for credit to the accounts of the holders of beneficial interest in the debt securities. Each global security would:

 

    be registered in the name of a depositary, or its nominee, that we would identify in a prospectus supplement;

 

    be deposited with the depositary or nominee or custodian; and

 

    bear any required legends.

No global security may be exchanged in whole or in part for debt securities registered in the name of any person other than the depositary or any nominee unless:

 

    the depositary has notified us that it is unwilling or unable to continue as depositary or has ceased to be qualified to act as depositary;

 

    an event of default has occurred and is continuing with respect to the debt securities of the applicable series; or

 

    any other circumstance described in a prospectus supplement has occurred permitting or requiring the issuance of any such security.

As long as the depositary, or its nominee, is the registered owner of a global security, the depositary or nominee would be considered the sole owner and holder of the debt securities represented by the global security for all purposes under the indentures. Except in the above limited circumstances, owners of beneficial interests in a global security would not be:

 

    entitled to have the debt securities registered in their names;

 

    entitled to physical delivery of certificated debt securities; or

 

    considered to be holders of those debt securities under the indenture.

Payments on a global security would be made to the depositary or its nominee as the holder of the global security. Some jurisdictions have laws that require that certain purchasers of securities take physical delivery of such securities in definitive form. These laws may impair the ability to transfer beneficial interests in a global security.

Institutions that have accounts with the depositary or its nominee are referred to as “participants.” Ownership of beneficial interests in a global security would be limited to participants and to persons that may hold beneficial interests through participants. The depositary would credit, on its book-entry registration and transfer system, the respective principal amounts of debt securities represented by the global security to the accounts of its participants.

Ownership of beneficial interests in a global security would be shown on and effected through records maintained by the depositary, with respect to participants’ interests, or any participant, with respect to interests of persons held by participants on their behalf.

Payments, transfers and exchanges relating to beneficial interests in a global security would be subject to policies and procedures of the depositary. The depositary policies and procedures may change from time to time.

 

34


Table of Contents

Neither any trustee nor we would have any responsibility or liability for the depositary’s or any participant’s records with respect to beneficial interests in a global security.

The prospectus supplement would describe the specific terms of the depository arrangement for debt securities of a series that are issued in global form. The Company and its agents, the trustee, and any of its agents would not have any responsibility or liability for any aspect of the records relating to or payments made on account of beneficial ownership interests in the global debt security or for maintaining, supervising or reviewing any records relating to the beneficial ownership interests.

Conversion or Exchange Rights

Debt securities offered hereby may be convertible into or exchangeable for shares of our common or preferred stock. The terms and conditions of such conversion or exchange will be set forth in the applicable prospectus supplement. Such terms may include, among others, the following:

 

    the conversion or exchange price;

 

    the conversion or exchange period;

 

    provisions regarding our ability or that of the holder to convert or exchange the debt securities;

 

    events requiring adjustment to the conversion or exchange price; and

 

    provisions affecting conversion or exchange in the event of our redemption of such debt securities.

Covenants

Unless otherwise indicated in a prospectus supplement, the debt securities would not have the benefit of any covenants that limit or restrict our business or operations, the pledging of our assets or the incurrence by us of indebtedness. We would describe in the applicable prospectus supplement any material covenants of a series of debt securities.

Concerning the Trustee

We would identify the trustee with respect to any series of debt securities in the prospectus supplement relating to the debt securities. You should note that if the trustee becomes a creditor of the Company, the indenture and the Trust Indenture Act of 1939 limit the rights of the trustee to obtain payment of claims in certain cases, or to realize on certain property received in respect of certain claims, as security or otherwise. The trustee and its affiliates may engage in, and would be permitted to continue to engage in, other transactions with us and our affiliates. If, however, the trustee acquires any “conflicting interest” within the meaning of the Trust Indenture Act of 1939, it must eliminate the conflict or resign.

The holders of a majority in principal amount of the then outstanding debt securities of any series may direct the time, method and place of conducting any proceeding for exercising any remedy available to the trustee. If an event of default occurs and is continuing, the trustee, in the exercise of its rights and powers, must use the degree of care and skill of a prudent person in the conduct of his or her own affairs. Subject to this provision, the trustee would be under no obligation to exercise any of its rights or powers under the indenture at the request of any of the holders of the debt securities, unless they have offered to the trustee reasonable indemnity or security.

DESCRIPTION OF WARRANTS

We may issue warrants to purchase preferred stock or common stock. We may offer warrants separately or together with one or more additional warrants, debt securities, shares of preferred stock or common stock, or any combination of those securities in the form of units, as described in the applicable prospectus supplement. If we issue warrants as part of a unit, the prospectus supplement will specify whether those warrants may be separated

 

35


Table of Contents

from the other securities in the unit prior to the warrants’ expiration date. We may issue the warrants under warrant agreements to be entered into between us and a bank or trust company, as warrant agent, all as described in the prospectus supplement. If we issue the warrants under warrant agreements, the warrant agent will act solely as our agent in connection with the warrants and will not assume any obligation or relationship of agency or trust for or with any holders or beneficial owners of warrants.

We will describe the particular terms of any warrants that we offer in the prospectus supplement relating to those warrants. Those terms may include the following:

 

    the specific designation and aggregate number of warrants, and the price at which we will issue the warrants;

 

    the currency or currency units in which the offering price, if any, and the exercise price are payable;

 

    the date on which the right to exercise the warrants will begin and the date on which the right will expire or, if the warrants are not continuously exercisable throughout that period, the specific date or dates on which they are exercisable;

 

    whether the warrants will be issued in fully registered form or bearer form, in definitive or global form or in any combination of these forms;

 

    any applicable material United States federal income tax considerations;

 

    the identity of the warrant agent, if any, for the warrants and of any other depositaries, execution or paying agents, transfer agents, registrars or other agents;

 

    the designation, aggregate principal amount, currency, denomination and terms of any debt securities that may be purchased upon exercise of the warrants;

 

    the designation, amount, currency, denominations and terms of any preferred stock or common stock purchasable upon exercise of the warrants;

 

    if applicable, the designation and terms of the debt securities, preferred stock or common stock with which the warrants are issued and the number of warrants issued with each security;

 

    if applicable, the date from and after which the warrants and the related debt securities, preferred stock or common stock will be separately transferable;

 

    the principal amount of debt securities or the number of shares of preferred stock or common stock purchasable upon exercise of any warrant and the price at which those shares may be purchased;

 

    provisions for changes to or adjustments in the exercise price;

 

    if applicable, the minimum or maximum number of warrants that may be exercised at any one time;

 

    information with respect to any book-entry procedures;

 

    any antidilution provision of the warrants;

 

    any redemption or call provisions; and

 

    any additional terms of the warrants, including terms, procedures and limitations relating to the exchange and exercise of the warrants.

Pursuant to the Loan and Security Agreement, dated January 17, 2012, among TransEnterix Surgical, Silicon Valley Bank and Oxford Finance LLC, as amended, on December 21, 2012, TransEnterix Surgical issued warrants to purchase an aggregate of 279,587 shares of common stock to the lenders, Silicon Valley Bank and to Oxford Finance LLC. Following the merger, these warrants were assumed by us and are now exercisable for our common stock. Pursuant to a stock purchase agreement dated March 22, 2013 among SafeStitch and the investors executing such agreement, SafeStitch issued warrants to acquire 1,209,600 shares of common stock. As of March 28, 2014, warrants to acquire 1,285,394 shares of our common stock remain outstanding.

 

36


Table of Contents

DESCRIPTION OF UNITS

We may issue units consisting of one or more of the other securities that may be offered under this prospectus, in any combination. These units may be issuable as, and for a specified period of time may be transferable only as, a single security, rather than as the separate constituent securities comprising such units. The statements made in this section relating to the units are summaries only and are not complete. When we issue units, we will provide the specific terms of the units in a prospectus supplement. To the extent the information contained in the prospectus supplement differs from this summary description, you should rely on the information in the prospectus supplement.

RATIO OF EARNINGS TO FIXED CHARGES

If we offer debt securities and/or shares of preferred stock under this prospectus, then we will, if required at that time, provide a ratio of earnings to fixed charges and/or ratio of combined fixed charges and preference dividends to earnings, respectively, in the applicable prospectus supplement for such offering.

LEGAL MATTERS

Certain legal matters with respect to the securities offered hereby have been passed upon by Ballard Spahr LLP.

EXPERTS

The consolidated financial statements as of December 31, 2013 and 2012 and for each of the two years in the period ended December 31, 2013 incorporated by reference in this Prospectus have been so incorporated in reliance on the report of BDO USA, LLP, an independent registered public accounting firm, (the report on the consolidated financial statements contains an explanatory paragraph regarding the Company’s ability to continue as a going concern) incorporated herein by reference, given on the authority of said firm as experts in auditing and accounting.

INCORPORATION BY REFERENCE

The SEC allows us to “incorporate by reference” in this prospectus the information in other documents that we file with it, which means that we can disclose important information to you by referring you to those documents containing such information. This prospectus is part of a registration statement we filed with the SEC. You should rely on the information incorporated by reference in this prospectus and the registration statement. The information incorporated by reference is considered to be part of this prospectus and information we file later with the SEC will automatically update and supersede this information and information contained in documents filed earlier with the SEC. We incorporate by reference the documents listed below and any future filings made with the SEC under Section 13(a), 13(c), 14 or 15(d) of the Exchange Act prior to the termination of the offering; provided, that we are not incorporating by reference any documents or information deemed to have been furnished and not filed in accordance with SEC rules. The documents we are incorporating by reference are:

 

    our Annual Report on Form 10-K for the year ended December 31, 2013, filed on March 5, 2014, our Annual Report on Form 10-K/A for the year ended December 31, 2013, filed on March 14, 2014, our Annual Report on Form 10-K/A Amendment No. 2 for the year ended December 31, 2013, filed on March 31, 2014 and our Annual Report on Form 10-K/A Amendment No. 3 for the year ended December 31, 2013, filed on April 2, 2014;

 

    our Current Report on Form 8-K/A filed on November 13, 2013 (Item 9.01), our Current Report on Form 8-K filed on February 19, 2014 (Items 5.02, 5.05, and 5.07), our Current Report on Form 8-K filed on April 1, 2014 (Items 5.03 and 9.01) and our Current Report on Form 8-K filed on April 1, 2014 (Items 8.01 and 9.01);

 

37


Table of Contents
    our definitive Information Statement on Schedule 14C filed February 21, 2014; and

 

    the description of the Company’s common stock contained in the Registration Statement on Form 8-A filed on July 30, 1991 and in the Current Report on Form 8-K filed on March 31, 2014 (Item 8.01).

We will furnish to you, on written or oral request, a copy of any or all of the documents that have been incorporated by reference, including exhibits to these documents. You may request a copy of these filings at no cost by writing or telephoning our Secretary at the following address and telephone number:

TransEnterix, Inc. Attention: Joshua Weingard, Chief Legal Officer and Secretary 635 Davis Drive, Suite 300 Morrisville, NC 27560 Telephone No.: (919) 765-8400

WHERE YOU CAN FIND MORE INFORMATION

We have filed with the SEC a registration statement on Form S-3 under the Securities Act to register our securities being offered in this prospectus. This prospectus, which constitutes a part of the registration statement, does not contain all the information set forth in the registration statement or the exhibits and schedules filed thereto. For further information about us and our securities offered by this prospectus, we refer you to the registration statement and the exhibits and schedules filed with the registration statement. Any statement contained in this prospectus regarding the contents of any contract or any other document that is filed as an exhibit to the registration statement is not necessarily complete and each such statement is qualified in all respects by reference to the full text of such contract or other document filed as an exhibit to the registration statement. You may read and copy any materials we file with the SEC, including the registration statement, at the SEC’s Public Reference Room at 100 F Street, NE, Washington, D.C. 20549, on official business days during the hours of 10:00 a.m. to 3:00 p.m. You may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC also maintains an Internet website that contains reports, proxy statements and other information about issuers, like us, that file electronically with the SEC. The address of that website is http://www.sec.gov. You may also inspect our SEC reports and other information at our website at www.transenterix.com. Information on or accessible through our website is not a part of this prospectus. We are subject to the information reporting requirements of the Exchange Act, and file reports, proxy statements and other information with the SEC. These reports, proxy statements and other information are available for inspection and copying at the public reference room and website of the SEC referred to above.

 

38


Table of Contents

 

 

LOGO

12,500,000 Shares

Common Stock

 

 

PROSPECTUS SUPPLEMENT

April 14, 2014

 

 

Stifel

RBC Capital Markets

Ladenburg Thalmann & Co.

Raymond James